HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jun 14, 2012, 07:57 AM
Registered User
Joined Dec 2010
228 Posts
New Product
NanoWii.. ATmega32u4 based MultiWii FC

Hi,

I would like to present my new NanoWii FC



new version 1.0


see http://www.rcgroups.com/forums/showp...&postcount=204 for chage list


it is based on the ATmega32u4 whitch is the processor of the Arduino Leonardo.
Its advantages compared with a promini (ATmega328p) are:

- USB on chip (no FTDI or UART needed)
- a free serial port (its possible to use a Spektrum Satellite together with the GUI)
- 6 high resolution (11-bit) PWM outputs
- 2.5kB RAM

it comes with the latest Arduino Leonardo bootloader whitch is released with arduino 1.0.1 so you just need to select the leonardo to use it.
The onboard 6dof IMU is a MPU-6050 (Gyro & ACC)

it is supported by MultiWii since 2.0 (support was adjusted in dev20120606).

it will be sold by paul bake(flyduino.com).
the first charge should be available next week
it is available now http://flyduino.net/NanoWii-ATmega32...ed-MultiWii-FC

hope you enjoy it

[update 27 Jul. 2012]
For those who have ESC's that won't arm with the NanoWii.. here is a solution
http://forum.flyduino.net/viewtopic.php?f=12&t=41

NanoWii fun..
CIMG4030 (7 min 2 sec)


warthox hardcore acro
mwc quad // nanowii board (2 min 35 sec)


[/update]


regards

Felix
juuuut is offline Find More Posts by juuuut
Last edited by juuuut; Sep 20, 2012 at 01:03 AM.
Reply With Quote
Sign up now
to remove ads between posts
Old Jun 14, 2012, 08:08 AM
Bitten by the RC Bug....
vineet_p's Avatar
India, Andhra Pradesh, Hyderabad
Joined Aug 2011
789 Posts
That's pretty cool!
What are the gyros and acc used? ITG3205/3200 and ADXL345/BMA180 ?
And how much will it cost?
Any idea to launch Baro+Mag also?

Vineet
vineet_p is offline Find More Posts by vineet_p
Reply With Quote
Old Jun 14, 2012, 08:13 AM
Mmmmmmm!
WiseDuck's Avatar
Kingdom of Sweden, Dalarna County, Sater
Joined Oct 2011
3,352 Posts
Ohh, nice and compact, I like it! And yes a baro would be nice to have there and possible a mag too if there's enough space for one.
WiseDuck is offline Find More Posts by WiseDuck
Reply With Quote
Old Jun 14, 2012, 08:14 AM
Registered User
Joined Dec 2010
228 Posts
Hi Vineet,

it uses a MPU-6050 whitch is a combined gyro & ACC sensor.
you can connect any ic baro or mag to it.

regards

felix
juuuut is offline Find More Posts by juuuut
Reply With Quote
Old Jun 14, 2012, 09:11 AM
RCGroups Heli Editor
ndfly700's Avatar
United States, TN, Brentwood
Joined Dec 2010
165 Posts
Nice Looking board, I want one
ndfly700 is offline Find More Posts by ndfly700
Reply With Quote
Old Jun 14, 2012, 09:37 AM
Inverted Electric Flyer
tmproff's Avatar
United States, TX, Humble
Joined Jan 2004
502 Posts
Any plans for a US based vendor?
tmproff is offline Find More Posts by tmproff
Reply With Quote
Old Jun 14, 2012, 09:57 AM
Droner
SebastianJ's Avatar
Denmark, Capital Region of Denmark, CPH
Joined Mar 2006
2,410 Posts
Is it 1s capable?
SebastianJ is offline Find More Posts by SebastianJ
Reply With Quote
Old Jun 14, 2012, 10:16 AM
Registered User
Joined Dec 2010
228 Posts
Quote:
Originally Posted by tmproff View Post
Any plans for a US based vendor?
it is produced by flyduino as far as i know he is shipping to the US

Quote:
Originally Posted by SebastianJ
Is it 1s capable??
yes it works with 3,3 -5v (even if this is not atmel datasheet conform) i checked it

to use it with 1s it is better to connect the lipo direct to VCC so there is no 5v regulator reducing the voltage in between.

regards felix
juuuut is offline Find More Posts by juuuut
Reply With Quote
Old Jun 14, 2012, 10:21 AM
Droner
SebastianJ's Avatar
Denmark, Capital Region of Denmark, CPH
Joined Mar 2006
2,410 Posts
Quote:
Originally Posted by juuuut View Post
it is produced by flyduino as far as i know he is shipping to the US



yes it works with 3,3 -5v (even if this is not atmel datasheet conform) i checked it

to use it with 1s it is better to connect the lipo direct to VCC so there is no 5v regulator reducing the voltage in between.

regards felix
Thanks for confirming
SebastianJ is offline Find More Posts by SebastianJ
Reply With Quote
Old Jun 14, 2012, 10:55 AM
Bitten by the RC Bug....
vineet_p's Avatar
India, Andhra Pradesh, Hyderabad
Joined Aug 2011
789 Posts
Quote:
Originally Posted by juuuut View Post
Hi Vineet,
it uses a MPU-6050 whitch is a combined gyro & ACC sensor.
integrated Acc and Gyros.. that' one smart FC.
vineet_p is offline Find More Posts by vineet_p
Reply With Quote
Old Jun 14, 2012, 01:39 PM
Registered User
Goofy23's Avatar
Hamburg, Germany
Joined Jan 2011
1,075 Posts
yes US shipping is in general no problem, only paypal is a bit picky, state have to be only 2 letters in the shipping adress, you can enter a state manually on the shipping adress, but if you enter the full name those are mostly not accepted by paypal.
Simply take the same adress as billing and shipping adress, and only the 2 letters, then paypal accept it.
Goofy23 is offline Find More Posts by Goofy23
Reply With Quote
Old Jun 14, 2012, 02:09 PM
Registered User
Joined Jun 2006
1,871 Posts
Quote:
Originally Posted by Goofy23 View Post
yes US shipping is in general no problem, only paypal is a bit picky, state have to be only 2 letters in the shipping adress, you can enter a state manually on the shipping adress, but if you enter the full name those are mostly not accepted by paypal.
Simply take the same adress as billing and shipping adress, and only the 2 letters, then paypal accept it.
does it have pin s already soldering?
titeuf007 is offline Find More Posts by titeuf007
Reply With Quote
Old Jun 14, 2012, 02:21 PM
Registered User
Altura's Avatar
France, IdF, Paris
Joined May 2011
114 Posts
Argg
Just ordered one but it seems to have two different pages
http://flyduino.net/NanoWii-ATmega32...ed-MultiWii-FC
http://flyduino.net/Miniwii-Flightcontroller-Kit_2

I took the wrong one (Miniwii) but the picture and the price are exactly same as the nanowii!!!
help me please!

PS: I can't even find again the page I've ordered from on the flyduino site ??? just 5 minutes after paying!
Altura is offline Find More Posts by Altura
Last edited by Altura; Jun 14, 2012 at 02:36 PM.
Reply With Quote
Old Jun 14, 2012, 02:43 PM
Registered User
Goofy23's Avatar
Hamburg, Germany
Joined Jan 2011
1,075 Posts
dont worry, to be sure you give me your name so i can check.
Goofy23 is offline Find More Posts by Goofy23
Reply With Quote
Old Jun 14, 2012, 04:31 PM
Registered User
Joined May 2012
40 Posts
Hey first of all Congratulations with the Nanowii
I have just did a order on your shop and dat board is the perfect board for my project
Now I have the most pices for project
Dus I placed that board directly on my order
Just I needed the t-Motor Esc 10Amp for the T-Motor MT1306 3100KV
But I have already the 6Amp That will also go (I hope)

Can I maybe find you on FB or twitter?
Many thanks
nperdaen is offline Find More Posts by nperdaen
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Flyduino Mega , a Multiwii/Ardupirates/Aeroquad based aerial video platform FC Goofy23 Multirotor Electronics 3832 Sep 19, 2013 05:38 AM
Discussion Beginner's Guide To Programming the Multiwii/Paris FC superjon Multirotor Talk 1 Dec 21, 2011 09:14 AM
Sold **Both SOLD** 2x MultiWii FC Original Nintendo sensors or ITG3200 / BMA180 wazzer Aircraft - Electric - Multirotor (FS/W) 7 Aug 25, 2011 08:59 AM
Discussion My new FC board - MultiWii Compatible caotri Multirotor Talk 4 Aug 06, 2011 01:44 AM