|Jun 13, 2012, 05:00 PM|
Joined Feb 2005
Can't get Hobbyking 6ch tx to work with computer
After waiting for two months for a usb programming cable for my Hobbyling 6ch rx I now can't get it to work.
I have downloaded the cable software and the T6 configure.
I have assigned the usb to com port 5.
But when the T6 configure programme is running with the transmitter switched on, the programe freezes.
Turn the transmitter off and it works fine, but it can't programme transmitter when it is switched off.
Has anyone got any ideas what I am doing wrong?
|Jun 13, 2012, 05:09 PM|
Can't help you on the TC configure, but have a look at:
I use "Digital Radio" which seems to be one of the most straight forward pieces of SW for the HK-T6A, and it's very good value for the (little) money.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion X650v4 can't get A.K.E HighSPEED PWM 12A ESC to work properly||DutchAirVideo||Multirotor Talk||2||Apr 02, 2013 12:23 PM|
|Discussion Can't get more range with Lawmate's 1.2 ghz TX/RX than with default rubber ducky||Bram1982||Radios||0||Apr 19, 2012 04:19 PM|
|Discussion Can't get my focus4 tx to work with FMS||bobafet1||Simulators||7||Apr 23, 2007 12:33 PM|
|Discussion Can't get Esky (CP2) TX to work with simulator||nickbuol||Micro Helis||6||Mar 21, 2007 12:02 PM|
|Discussion Can't get ESky TX to work with Phoenix||key||Simulators||1||Mar 12, 2007 09:43 AM|