HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jun 12, 2012, 03:14 AM
Registered User
Mustflynow's Avatar
Joined May 2012
201 Posts
Discussion
Naza GPS Setup Tips and Vid only!

I have started this thread in the hope that peeps will post their setup guides, radio setup and setup video to help others.

So please post your tips and vids here and keep the chat to a minimum, Thanks

If we still have questions then the best place to asked them would be at the Naza GPS Owners thread.

Thanks for the help and input!

Ed
Mustflynow is offline Find More Posts by Mustflynow
Reply With Quote
Sign up now
to remove ads between posts
Old Jun 12, 2012, 06:55 PM
Registered User
FL
Joined Jul 1999
435 Posts
I am watching. My GPS came in today.
testfly is offline Find More Posts by testfly
Reply With Quote
Old Jun 12, 2012, 10:55 PM
Registered User
Mustflynow's Avatar
Joined May 2012
201 Posts
Good video for radio setup starting at 25.07 min

DJI F550 Flame Wheel feat. Wookong M + NAZA Video-Tutorial/ Review (46 min 15 sec)
Mustflynow is offline Find More Posts by Mustflynow
Reply With Quote
Old Jun 13, 2012, 05:40 AM
Artic jetflyer
sap_2000's Avatar
Stabekk, Norway
Joined Sep 2004
278 Posts
I made a video to show how I set up rth (FS) in every flight mode with a switch on the dx8 and wkm. Naza works the same.
Also shows how preset fail safe works at the end.

DJI WK-M and Spektrum DX8 - How to set up Fail-Safe and RTH with a switch (2 min 44 sec)
sap_2000 is offline Find More Posts by sap_2000
Reply With Quote
Old Jun 13, 2012, 06:12 AM
Registered User
Mustflynow's Avatar
Joined May 2012
201 Posts
Quote:
Originally Posted by sap_2000 View Post
I made a video to show how I set up rth (FS) in every flight mode with a switch on the dx8 and wkm. Naza works the same.
Also shows how preset fail safe works at the end.

http://www.youtube.com/watch?v=LPGb4WK_fkk
Thanks!
Mustflynow is offline Find More Posts by Mustflynow
Reply With Quote
Old Jun 13, 2012, 02:21 PM
Registered User
FL
Joined Jul 1999
435 Posts
This video might be helpful if you have the VR blinking red and the motors won't start.
naza-tips-gopro2.wmv (6 min 59 sec)

It took me a few hours and a phone call to a buddy before I figured out the simple fix.
testfly is offline Find More Posts by testfly
Reply With Quote
Old Jun 13, 2012, 02:31 PM
Registered User
Mustflynow's Avatar
Joined May 2012
201 Posts
Quote:
Originally Posted by testfly View Post
This video might be helpful if you have the VR blinking red and the motors won't start.
http://youtu.be/Q4oSjoQLl-Q
It took me a few hours and a phone call to a buddy before I figured out the simple fix.
Good tip ...thanks
Mustflynow is offline Find More Posts by Mustflynow
Reply With Quote
Old Jun 13, 2012, 02:33 PM
Registered User
Mustflynow's Avatar
Joined May 2012
201 Posts
GPS X,Y,Z setup as pointed out by Blade Strike...Thanks!

Setting up the Wookong M center of gravity (3 min 11 sec)
Mustflynow is offline Find More Posts by Mustflynow
Reply With Quote
Old Jun 13, 2012, 03:58 PM
Registered User
Joined Apr 2012
27 Posts
This is really a helpful thread. Thanks....
BoomerSooner is offline Find More Posts by BoomerSooner
Reply With Quote
Old Jun 13, 2012, 04:04 PM
Registered User
Joined Sep 2010
7 Posts
Can We Make Requests Here?

I'd like to see a video on a NAZA/GPS setup using a Futaba 8FG and a S-Bus capable RX.

Brown_Pig
brown_pig is offline Find More Posts by brown_pig
Reply With Quote
Old Jun 14, 2012, 10:37 PM
Registered User
FL
Joined Jul 1999
435 Posts
Guys,
A quick update.
I am happy to say things are going well with the setup so far.

Here is a url to a video of the second test flight. (I must admit I was behind my trailer on the first flight just in case something was not right. ;-)

gps-flight.wmv (5 min 53 sec)


Now I am wanting to setup a switch to "return to home". But, I have no clue where to start with that. Any help on this would be great!

I am using a JR921X rx and the JR9503 tx. Using acro mode. (not sure if this is correct or not)

Once I have this setup and feel it to be correct, I will gladly share my complete setup.

Thanks,
Troy
testfly is offline Find More Posts by testfly
Last edited by testfly; Jun 23, 2012 at 04:56 PM.
Reply With Quote
Old Jun 14, 2012, 10:55 PM
Artic jetflyer
sap_2000's Avatar
Stabekk, Norway
Joined Sep 2004
278 Posts
Quote:
Originally Posted by testfly View Post
Now I am wanting to setup a switch to "return to home". But, I have no clue where to start with that. Any help on this would be great!

I am using a JR921X rx and the JR9503 tx. Using acro mode. (not sure if this is correct or not
Congrats Troy!
Setting up rth = the fail safe area of the mode slider in the naza assistant.
Have a look at my video in post #4 in this thread.
The mixers in your 9503 is simillar to the dx8 and the wkm identical to the naza in this aspect.
sap_2000 is offline Find More Posts by sap_2000
Reply With Quote
Old Jun 16, 2012, 03:15 PM
Registered User
Mustflynow's Avatar
Joined May 2012
201 Posts
Dx7 setup by Mauro

http://www.rcgroups.com/forums/showthread.php?p=21873794
Mustflynow is offline Find More Posts by Mustflynow
Reply With Quote
Old Jun 19, 2012, 09:07 AM
Registered User
FL
Joined Jul 1999
435 Posts
naza-gps-9503.wmv (8 min 57 sec)
testfly is offline Find More Posts by testfly
Reply With Quote
Old Jun 19, 2012, 09:18 AM
Registered User
Lake Zurich, IL
Joined Jan 2008
5,654 Posts
Quote:
Originally Posted by testfly View Post
Guys,
A quick update.
I am happy to say things are going well with the setup so far.

Here is a url to a video of the second test flight. (I must admit I was behind my trailer on the first flight just in case something was not right. ;-)

http://www.seabreezeparachutes.com/d...gps-flight.wmv

Now I am wanting to setup a switch to "return to home". But, I have no clue where to start with that. Any help on this would be great!

I am using a JR921X rx and the JR9503 tx. Using acro mode. (not sure if this is correct or not)

Once I have this setup and feel it to be correct, I will gladly share my complete setup.

Thanks,
Troy
(JR R921, R922, R1221, R1222 and Spektrum
AR7100, AR7100R, AR7600, AR9000, AR9100 Receivers Only)
During the binding process, insert the bind plug in the bind port or in the charge jack, as the receiver is powered up. The LEDs in each receiver should blink, indicating that the receiver is in bind mode. Before binding the receiver to the transmitter and with the receiver in bind mode, remove the bind plug. The LEDs will still be blinking. With the control sticks and switches in the desired fail-safe positions, bind the transmitter to the receiver by pressing and holding the bind buttons on the back of the transmitter/module and turning on the transmitter. The system should connect in less than 15 seconds. The receiver is now programmed for preset fail-safe.
Note: Fail-safe positions are stored via the stick and switch positions on the transmitter during binding.

http://www.jrradios.com/ProdInfo/Fil...930-manual.pdf
Page G20
sidneyw is offline Find More Posts by sidneyw
Site Sponsor
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product GAUI 500x/ GU-INS GPS Owners Thread - Tips, Problems And Experiences sap_2000 Multirotor Talk 220 Jul 01, 2014 09:58 PM
Discussion Walkera Genius Cp Brushless Options, Tips, Tricks, Pics, Vids And Mods f.a.r.m.e.r Micro Helis 2315 May 06, 2014 10:18 AM
Found DJI NAZA GPS Upgrade Module for the DJI Naza Flight Controller skyhulk Aircraft - Electric - Multirotor (FS/W) 10 Jul 20, 2012 08:47 PM
Discussion Need tips for a cheap OSD with home arrow and gps? zkilzz FPV Talk 2 Feb 29, 2012 07:44 PM
Question SETUP Turnigy 9x with ER9X setup for NAZA? Medicineman76 Radios 0 Feb 26, 2012 08:51 PM