HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old May 29, 2012, 12:20 AM
Registered User
United States, IN, Indianapolis
Joined Oct 2010
1,030 Posts
Discussion
Jack'ed Rabbit FC Config Tool development

Jack'ed Rabbit FC Config BETA 1.0.3 released.

Frame editor and FW update not available yet.

.NET Framework 4.0 must be installed on your PC. Get it HERE

Some are having issues with PC's running XP it seems. If you are running XP, update to Service Pack 3 and ensure .NET Framework 4 is installed.

If you have trouble seeing the GPS maps, check your firewall and allow the application access to the internet.

NOTE: The FC has a tendency to hang on serial comms. This is true with the original, as well as my config tool.

To reduce the chance of hang ups, DO NOT use the USB cable that came with the FC, it is total JUNK.

If you have no power to the FC other than through USB, DISCONNECT ALL accessory components, i.e. GPS, Sonar, Receiver etc. This is especially true when using a notebook/laptop as their USB ports can be limited on power available, they may even put them to sleep briefly in the middle of a send!!!

However, I have mine connected to a laptop with a quality cable, with GPS, Rx and Sonar connected using only USB power and I rarely experience a hang up. I just done about 30-40 consecutive read/writes with no issues at all.

The best solution is to use a quality USB cable, and external power.

1.0.4
Possible GPS fix for users east of the prime meridian.

1.0.3
Fixed Mix up with HEXA frame types. It would SEND the right type, but when reading it would show the wrong type.

1.0.2
Added swap for map coordinates
Added FW detection for pre 1.212 compatibility.
Changed the name to Jack'ed Rabbit < Thanks for the Idea Soup!!!!
KKUSA is offline Find More Posts by KKUSA
Last edited by KKUSA; Jul 13, 2012 at 08:44 PM.
Reply With Quote
Sign up now
to remove ads between posts
Old May 29, 2012, 12:20 AM
Registered User
United States, IN, Indianapolis
Joined Oct 2010
1,030 Posts
Reserved..............
KKUSA is offline Find More Posts by KKUSA
Reply With Quote
Old May 29, 2012, 06:50 AM
making crashing a lifestyle!
dutchcommando's Avatar
The Netherlands, UT, Soest
Joined Feb 2012
1,039 Posts
subscribed..
dutchcommando is offline Find More Posts by dutchcommando
Reply With Quote
Old May 29, 2012, 10:54 AM
Registered User
Spain.
Joined Jul 2009
303 Posts
subscribed..
Nosepo is offline Find More Posts by Nosepo
Reply With Quote
Old May 29, 2012, 11:00 AM
It started with a red biplane
tony3di's Avatar
Joined Nov 2011
197 Posts
Subscribed...

We really need a better looking GUI. If you need any help in graphic design give us a shout. We know what we want to see.
tony3di is offline Find More Posts by tony3di
Reply With Quote
Old May 29, 2012, 11:54 AM
Registered User
Joined Dec 2006
29 Posts
Subscribed
memini is offline Find More Posts by memini
Reply With Quote
Old May 29, 2012, 12:29 PM
Registered User
United States, IN, Indianapolis
Joined Oct 2010
1,030 Posts
Quote:
Originally Posted by tony3di View Post
Subscribed...

We really need a better looking GUI. If you need any help in graphic design give us a shout. We know what we want to see.
Certainly....Just post any ideas you have.
KKUSA is offline Find More Posts by KKUSA
Reply With Quote
Old May 29, 2012, 09:00 PM
Registered User
Joined Oct 2011
70 Posts
subscribed
Corlissmedia is offline Find More Posts by Corlissmedia
Reply With Quote
Old May 30, 2012, 10:34 AM
Registered User
Joined Jun 2006
1,920 Posts
woooooo
great!!
titeuf007 is offline Find More Posts by titeuf007
Reply With Quote
Old May 30, 2012, 10:11 PM
Registered User
cr8tive_leo's Avatar
Canada, ON, Cochrane District
Joined Oct 2011
743 Posts
Very cool work, looking forward to what you have planned.

I don't know if anyone knows about the neat little 'subscribe to thread' option under the thread tools. You don't have to post to subscribe to a thread... Just an Fyi.
cr8tive_leo is offline Find More Posts by cr8tive_leo
Reply With Quote
Old May 30, 2012, 10:34 PM
Advanced n00b
iscgdave's Avatar
United States, OH, Toledo
Joined Mar 2012
214 Posts
subscribed
iscgdave is offline Find More Posts by iscgdave
Reply With Quote
Old May 30, 2012, 10:56 PM
Registered User
United States, IN, Indianapolis
Joined Oct 2010
1,030 Posts
Made some headway on the new config tool today. Just some basic stuff. Only a few things actually work to send data to the FC at this point as I just done a few for testing until I get a nice layout together.

Rather than have everything on one screen and all crammed together, I decided to use a tabbed page system for most of the configuration stuff with a separate form that opens for data monitoring, firmware update, and custom frame geometry editor.

Let me know what you guys think or have anything in mind.
KKUSA is offline Find More Posts by KKUSA
Last edited by KKUSA; May 30, 2012 at 11:05 PM.
Reply With Quote
Old May 30, 2012, 11:19 PM
making crashing a lifestyle!
dutchcommando's Avatar
The Netherlands, UT, Soest
Joined Feb 2012
1,039 Posts
holy crap!!.....

that looks 1000 times better!

all looks very clear!

maybe you could make a screen for gps once they make it show in the gui you are already ready for that.

(i'm still waiting for my rabbit though, but been checking out the "obsolete" program.)
dutchcommando is offline Find More Posts by dutchcommando
Reply With Quote
Old May 31, 2012, 12:17 AM
Registered User
United States, IN, Indianapolis
Joined Oct 2010
1,030 Posts
Quote:
Originally Posted by dutchcommando View Post
holy crap!!.....

that looks 1000 times better!

all looks very clear!

maybe you could make a screen for gps once they make it show in the gui you are already ready for that.

(i'm still waiting for my rabbit though, but been checking out the "obsolete" program.)
There is some data coming through that may in fact be GPS data. I havent spent too much time trying to decode it though. I do have that in mind for when we do have that data coming from the FC for sure. It wont be of much use other than maybe checking the status, as we dont have a way to connect a wireless solution for data at this time for it to send data in real time to the PC.

A bluetooth adapter can be soldered in however, but this would only be short range. Would be good for wireless configuration though.
KKUSA is offline Find More Posts by KKUSA
Reply With Quote
Old May 31, 2012, 01:55 AM
Registered User
Fugbucker's Avatar
Australia, VIC, Hampton Park
Joined Feb 2011
792 Posts
Coming along nicely KK... You have probably already thought of it but just in case I would leave a couple of fields blank (seeing as you have a lot more space) for future upgrades...
Fugbucker is offline Find More Posts by Fugbucker
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Rabbit FC Telemetry & GCS!!! hybridav Multirotor Talk 1 Jun 23, 2012 04:51 AM
Discussion Rabbit FC + GPS hybridav Multirotor Talk 3 May 14, 2012 08:12 AM
Discussion What Drawing Tools For Fast Development Of Simulator Airfield Sceneries? JD-Slow-Thumbs CAD/CAM 1 May 04, 2012 02:48 AM
Discussion Canon Hackers Developement Kit (CHDK) New AP Tool For Me larry baraniuk Aerial Photography 6 Oct 17, 2011 11:56 PM