SMALL - espritmodel.com SMALL - Telemetry SMALL - Radio
Closed Thread
Thread Tools
This thread is privately moderated by Gravity Dodger, who may elect to delete unwanted replies.
Old May 21, 2012, 01:40 PM
White stuffs here time 2 build
Gravity Dodger's Avatar
Minneapolis Minnesnowtah
Joined Nov 2007
830 Posts
Trader Rating: 77
Sold
NEW EMP 1500 watt 5055-400kv motors

NEW EMP 1500 watt 5055-400kv motors for sale, these are my favorite motors for upgrading the FMS 1400mm line of warbids or any other 40-60 size airplane and are the higher watt sk versions.

SOLD
Paypal Preferred

Thanks for looking!
Gravity Dodger is offline Find More Posts by Gravity Dodger
Last edited by Gravity Dodger; May 22, 2012 at 10:37 PM.
Sign up now
to remove ads between posts
Old May 21, 2012, 03:47 PM
www.silentflyers.com
Cincy E-Flyer's Avatar
Cincinnati, OH
Joined Jun 2004
786 Posts
Trader Rating: 18
Have you used this on the FMS Corsair? I am wondering if the stock prop adapter from the Corsair will bolt onto the end of this motor. Are there threaded bolt holes to mount an adapter? What is the spacing? I am interested if I can verify that I can use it with my stock prop hub. Let me know.
Cincy E-Flyer is offline Find More Posts by Cincy E-Flyer
Old May 22, 2012, 02:12 AM
White stuffs here time 2 build
Gravity Dodger's Avatar
Minneapolis Minnesnowtah
Joined Nov 2007
830 Posts
Trader Rating: 77
Hi Cincy, yes I have this exact motor in my FMS corsair and also my T-28 and the the prop adapter is long enough and uses the same thread pattern for the stock spinner/nut. Spacing is 5mm longer than stock which is hardly noticeable and it's not very hard to make a new plywood firewall if you choose.
Gravity Dodger is offline Find More Posts by Gravity Dodger
Old May 22, 2012, 09:24 AM
www.silentflyers.com
Cincy E-Flyer's Avatar
Cincinnati, OH
Joined Jun 2004
786 Posts
Trader Rating: 18
I was not vey clear in my questions regarding the prop adapter. I did not notice in your picture that it comes with a prop adapter so it does have the bolt holes I referred to. I was just wondering if I would be able to mount the prop adapter from the stock motor onto this motor.

Not sure what you meant by the spacing being 5 mm longer. Will I required to make a plywood firewall or will I be able to mount it to the existing motor mount.

I am having trouble finding specs on this motor. Can it handle a 5S lipo and what is the max. continuous current?

Let me know where to senf PP payment.
Cincy E-Flyer is offline Find More Posts by Cincy E-Flyer
Last edited by Cincy E-Flyer; May 22, 2012 at 09:35 AM.
Old May 22, 2012, 10:27 AM
White stuffs here time 2 build
Gravity Dodger's Avatar
Minneapolis Minnesnowtah
Joined Nov 2007
830 Posts
Trader Rating: 77
Motor includes a prop adapter and mounting kit and is rated for 3-8s lipo and 80a or 1500 watts max continuous current.

Sent you a PM Cincy
Gravity Dodger is offline Find More Posts by Gravity Dodger
Closed Thread

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold 5055-700kv motor, Power 46 equivilant Gravity Dodger Aircraft - Electric - Power Systems (FS/W) 1 May 21, 2012 01:33 PM
Off Site ... Gravity Dodger Aircraft - Electric - Power Systems (FS/W) 0 May 20, 2012 08:13 PM
Sold New EMP 6364-230kv 2850 watt motor Gravity Dodger Aircraft - Electric - Power Systems (FS/W) 3 Apr 22, 2012 12:44 PM
Sold NEW EMP 5065-400kv 1820 Watt Motor Gravity Dodger Aircraft - Electric - Power Systems (FS/W) 3 Apr 18, 2012 10:47 AM
Sold Two NEW EMP 5055-580kv 1580 watt out-runner Gravity Dodger Aircraft - Electric - Power Systems (FS/W) 4 Apr 16, 2012 12:15 AM