I fly my other multis with 4s 5000 mah. On a 3.2 kgr bird I have about 6 minutes flight time.
I haven't finish this yet.

i ran 4s 5000mah on a y6 setup on 1147 props.
getting 8-9 mins flight

Ok so should I buy this frame or not?

Only if you are really interested in the middle "ecilop" camera mount.
If not, could be better frames for $129.

quite alot of flex in the frame, cam mount isnt very easy to adjust, so hard to balance the system. i got a v2 coming so will let u know if its any better

Where buy that v2 ?

Any video from that version?

Originally Posted by pabloreg

Where buy that v2 ?

Any video from that version?

I think if you order now you get the v2.
At least i hope so. I place my order one week ago and i hope i get the v2 version.
Fredde

Originally Posted by pabloreg

Where buy that v2 ?

Yes Tokaz is right. They don't sell the V1 anymore. So if you order you'll get the V2.

Originally Posted by FAST

HEY BUYCHINA.
WHY DON'T YOU ANSWER MY E-MAILS????????

Maybe because you're screaming Be patient, they'll send you a link to pay on taobao...

Originally Posted by RENATOA

I am balancing now between switching to Alu tubes, or ordering more serious 1mm wall thick carbon tubes, these:
http://www.hobbyking.com/hobbyking/s...mm_2_pcs_.html

Aren't those tube too big ? It seems the OD is 14 not 12mm right ? How wide was your config motor to motor ?

Originally Posted by Jodde73

This came up the other day, is it the "v2" version?
http://www.goodluckbuy.com/mini650-m...ount-ptz-.html

No that's the V1. Look at previous page (39-40) to see V2 pictures.

Originally Posted by Ramnes

RENATOA
I like that solution for the ESC's! I just have to drill holes in the plastic so the wires can run inside the steel tube. Thanks!
Jorn

I agree, nice solution. I'll think I'll copy you

Originally Posted by x23

...Aren't those tube too big ? It seems the OD is 14 not 12mm right ? How wide was your config motor to motor ?
...

Oups... you mean talon V2 tubes are 14mm ?!!!
Must check, thank you, you saved me $30 if true.

I have now 650mm between motors.

That's what says the first comment on the page.
What about those tubes?

why is carbon tube so important? what is wrong with the alu tubes.

its the frame which flexes, not the arm. and the standard tubes weigh nothing

@x23: Those tubes are protruded, i.e. all fibers are longitudinal, no twill, and the resistance is not good for flexing them.

Ali, importance is in the eye of beholder
Overall is about 70g save for quad or 100g for hex.

fair.

im intrigued at the flight times people are getting. with a Y6 setup i am getting 9mins flight time.
what are people getting in a hex setup.

im also interested what flights i will get with the same motors and props, but on my ecilop.
all 1147 gemfan props

Originally Posted by RENATOA

Not the legs breaks, but the clips to body pipes.

I came up with this idea. If it holds a heavy wind landing i dont know, but if thats the weak part i think two of this cable ties will do the job until it's possible to buy new ones.

Jorn

Here are the Mini 650 Instruction version II.

EDIT: Nope, file to big. But Eddy is hosting the file at the link below.

http://comicflyer.de/4downl/Mini650I...nversionII.pdf

Jorn