Joined Feb 2005
Added parts Parts Galore 2 frames 450 Pro all new ton of stuff for 110
You get everything in the pictures.
The motor is a regular 3400 kv gold motor.
The 3 cyclic servos are new MD9 metal digital Turnigy.
It's an HK 450 Pro clone, and was a Titan 450 pro clone Fbl frame-which you can also fly with barred head ofcourse.
The Titan has been made exactly like a 450 pro (everything compatible.) I moved the canopy studs up to the normal middle position, so its just like 450 pro accept it has a little more of a cut out in the back for flybarless unit to sit on, and wide slats on the sides rather than holes to stick a unit or pieces to. Pretty sweet-supposed to be well balanced also.
There is too much to list. If you can't make out something in the pic pm me.
2 New full frames (no wear, nothing broke) with TT gears and bearings and all with new metal 450 Pro clone heads and a pant load of new partz.
One is v3 fbl style frame wall set up. I just have a new fbarred head on it. You could get all this without that head for 100
Anyways It has a bottom plate and landing gear attached just needs couple more M2*8 screws and a few frame screws(included).
There is 2 spare new anti rotation brackets for this one and all the other spares work on both machines.
2 running complete new 450 Pro frames
3 new digital metal cyclic servos
good 3400kv motor
Complete metal tail casing with gears bearings, tail mixer, pitch lever, blades, blade holders, rear tail casing-everything but the chunk
2 full sets of canopy studs with screws,
2 new extra main shafts,
4 new feathering shafts,
new 450 pro vertical and horizontal CF fins with horizontal fin mount,
Spare full TT rear end (with gears, bearings and the 4 metal dowel studs),
new 450pro metal main shaft blocks with bearings,
new front lipo mount,
4 head dampners
more than 2 full sets of ball links,
2 new sets of servo linkages,
spare new Torque Tube with bearing holder for tail boom,
2 sets tail push rods with links,
2 sets new white paddles,
More than enough of going into plastic screws for a set and I think a little less of metal threading screws,
The HK with servos and motor has no bottom plate(cheap and easy to get -Align fits).
Looking for quick sale. Basically everything is brand new. One head has an outrage flybar the other has a new 450 Pro flybar over there by the 2 sets new white paddles.
Everything you see in the pictures 110 and 10 to help with shipping and paypal.
Last edited by blueindian; May 18, 2012 at 01:10 AM.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale||New 450 Pro parts Galore 2 full frames servos motor screws shafts gears bearings etc.||blueindian||Aircraft - Electric - Helis (FS/W)||2||May 16, 2012 12:21 AM|
|Wanted||Im lookin for $200 setup bnf quad trade 120+ ton O 450 pro parts/frames or bnf fbl450||blueindian||Aircraft - Electric - Multirotor (FS/W)||2||Apr 15, 2012 08:04 PM|
|For Sale||WTT all this Align V2 450 stuff for miniT/ duratrax vendetta stuff||blueindian||Cars - Trucks and Parts (FS/W)||0||Dec 08, 2011 08:44 PM|
|For Sale||WTT all this Align V2 450 stuff for miniT/vendetta stuff||blueindian||Cars - Cars and Parts (FS/W)||0||Dec 08, 2011 08:40 PM|
|Sold||WTT all this Align V2 450 stuff for miniT/vendetta stuff||blueindian||Aircraft - Electric - Helis (FS/W)||0||Dec 08, 2011 08:16 PM|