HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old May 15, 2012, 06:27 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
USA, TX, Teague
Joined Jul 2007
5,619 Posts
Discussion
Test

Testing...123
Dad_Roman is online now Find More Posts by Dad_Roman
Reply With Quote
Sign up now
to remove ads between posts
Old May 15, 2012, 06:36 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
USA, TX, Teague
Joined Jul 2007
5,619 Posts
The motor in the back is a OS 70 Four Stroke for comparision.

This stuff was hand made by a master builder.

One spoke is loose and needs resoldering. The wheels have a smidge of corrosion on them. Some easy off or CLR may take care of it.

If these are not nice enough and dont suit your needs it cool...I understand.

EDIT.....spokers are 4" Foam tires are tired too.
Dad_Roman is online now Find More Posts by Dad_Roman
Last edited by Dad_Roman; May 15, 2012 at 06:55 PM.
Reply With Quote
Old May 17, 2012, 09:36 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
USA, TX, Teague
Joined Jul 2007
5,619 Posts
More piccy's
Dad_Roman is online now Find More Posts by Dad_Roman
Reply With Quote
Old May 19, 2012, 07:19 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
USA, TX, Teague
Joined Jul 2007
5,619 Posts
New batch...

The one that looks complete.....NOT
It is missing the piston. Ring is loose on the outside. Have NOT looked inside but I can if you want.
Dad_Roman is online now Find More Posts by Dad_Roman
Reply With Quote
Old May 20, 2012, 12:03 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
USA, TX, Teague
Joined Jul 2007
5,619 Posts
Chief.....check this out

Apparently this motor had some Cool Power (CruelPower) run through it. Poor bearings never had a chance

Cam cover crumbled into pieces when removed

Cam gear damaged....never seen that before. Musta got a piece of bearing run through it. Valve adjuster screws look like somebody been hammerin on em

New parts already in shop

Going to make this an old style open rocker engine...see how that works out.

Just thought you might like to see whats happenin and see the end results.

Cheers....Shane
Dad_Roman is online now Find More Posts by Dad_Roman
Reply With Quote
Old May 20, 2012, 08:03 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
USA, TX, Teague
Joined Jul 2007
5,619 Posts
......
Dad_Roman is online now Find More Posts by Dad_Roman
Reply With Quote
Old May 21, 2012, 09:33 AM
Registered User
ChiefBerard's Avatar
United States, LA, Loreauville
Joined Mar 2012
27 Posts
Quote:
Originally Posted by Dad_Roman View Post
Chief.....check this out

Apparently this motor had some Cool Power (CruelPower) run through it. Poor bearings never had a chance

Cam cover crumbled into pieces when removed

Cam gear damaged....never seen that before. Musta got a piece of bearing run through it. Valve adjuster screws look like somebody been hammerin on em

New parts already in shop

Going to make this an old style open rocker engine...see how that works out.

Just thought you might like to see whats happenin and see the end results.

Cheers....Shane
Shane, this is awesome to see man! ... If that engine would have stayed in my possession it would have never run again! ... Please keep me informed on the status and when you are done post a video of it running! .... Haha...

By the way... I put some of your servo's in my ultra hots and competed in a 2-day IMAC contest the next weekend... Ended up placing 3rd and had a good time...

Glad to see we are putting our trades to good use.

Chief
ChiefBerard is offline Find More Posts by ChiefBerard
Reply With Quote
Old May 23, 2012, 08:28 PM
Twistaholic AMA 134406
Dad_Roman's Avatar
USA, TX, Teague
Joined Jul 2007
5,619 Posts
Quote:
Originally Posted by ChiefBerard View Post
Shane, this is awesome to see man! ... If that engine would have stayed in my possession it would have never run again! ... Please keep me informed on the status and when you are done post a video of it running! .... Haha...

By the way... I put some of your servo's in my ultra hots and competed in a 2-day IMAC contest the next weekend... Ended up placing 3rd and had a good time...

Glad to see we are putting our trades to good use.

Chief
Hey I found a great trading partner! Glad its workin on your end too!

Ok....Most these piccys are for other deals I have brewing

These are for you.....

K&B 46 Needs prop nut and washer. I imagine I can come up with these.

Magnum 46

Thunder Tiger 42 nice motor but has -1- broken lug.

Didnt know what you wanted so I threw in a pic of a OS 25. Really nice motor but no carb and no pipe. DUNNO if I can come up with these.

I figure your choice of one of these complete motors. If your interested in the 25 we can talk more

I have a nice 30 also. Didnt include it cause its gettin small. If interested lemme know.

Course there is always servos and batts etc. Plenty of choices

Look forward to hearin from ya!

Shane
Dad_Roman is online now Find More Posts by Dad_Roman
Last edited by Dad_Roman; May 23, 2012 at 08:47 PM.
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion HEXA SUPER HEAVY LIFT TESTING Video! - Maiden flight, 10lb payload test & GPS PH wac Multirotor Talk 23 Oct 15, 2012 07:34 PM
Discussion Testing........1...2...3.....Testing cruzroy Fuel Heli Talk 0 Apr 06, 2012 08:11 PM
Link testing of the new Blade 450X by RC Rototworld magazine test pilot guyro 3D Electric Heli Flying 0 Feb 28, 2012 09:51 AM
Discussion Photos, Test Flight/Test Flight, Photos? Mode One The Builders Workshop 15 Dec 19, 2011 10:16 AM
Discussion Another test of Changing thread description test of Test thread for next year Prof100 Foamies (Kits) 4 Dec 18, 2011 09:28 PM