Originally Posted by pepere

Ok thanks. But I think that the GPS is not necessary on the smartphone or the PC because the distance is calculate with the starting .
position.
On the MK that is what is done.

GPS is needed for some functions, like follow me function.

Originally Posted by Salocin

GPS is needed for some functions, like follow me function.

Yes in that situation.
And you, have you see the distance on your smartphone or in the GCS ?
I have no YS-X6. That is just a question to know what YS-X6 can done.

Originally Posted by pepere

Yes in that situation.
And you, have you see the distance on your smartphone or in the GCS ?
I have no YS-X6. That is just a question to know what YS-X6 can done.

No, unfortunately you don't see the distance.

Originally Posted by pepere

Yes in that situation.
And you, have you see the distance on your smartphone or in the GCS ?
I have no YS-X6. That is just a question to know what YS-X6 can done.

DTB = Distance to base.
Horizontal distance. Does not take into account altitude.

Flight out to 280m via wifi

04 nomad GCS (8 min 50 sec)

Ok i still get the leaning part when flying rough in manual 1 + 2. Upping the gains makes it a bit better but can,t get it completely out. Anyone know how to fix this? And I still miss yaw authority in gps mode. I hope there will be a good pid tuning guide soon.

Anybody know why while in auto stabalization why the quad will all of a sudden do a self landing. It will just come down with no control and no warning? I have videos if you want to see them to help.

when does the camera stabilization kick in all the time or just in ptz. How do I activate stabalization or turn it on.

Any help is appretiated.

Originally Posted by Mr_westie

DTB = Distance to base.
Horizontal distance. Does not take into account altitude.

Flight out to 280m via wifi
http://www.youtube.com/watch?v=4n4zxjbzTbs

Thank's for the video.

Anyone using the YS_X6 for gimbal control do you use digital on analog servos and what are the best servo's to use

Originally Posted by richkphoto

Anyone using the YS_X6 for gimbal control do you use digital on analog servos and what are the best servo's to use

http://www.rcgroups.com/forums/showt...0#post22742148

I read that the maximum flight speed is 10.2m/s, so in click & go mode or keyboard control mode I won't be able to reach 30mph ? Someone please clarify.

Originally Posted by zolpot

I read that the maximum flight speed is 10.2m/s, so in click & go mode or keyboard control mode I won't be able to reach 30mph ? Someone please clarify.

There is a option for "User defined"
So it depends how fast your craft can fly
I have not tested it yet.
It is on my list though.

I am looking for the 16 waypoint file
with date 20120818 or 20120822

So: YS-X6-201208xx-firmware-xxxx..........arm

//Frank

I have started a blog for ys product Q&A
Hopefully save us answering the same questions over and over.
It will only be relevant if more than one person can keep it updated
Any help appreciated.
Drop me a pm for write access.

http://ysusers.wordpress.com/

Originally Posted by Frank.T

I am looking for the 16 waypoint file
with date 20120818 or 20120822

So: YS-X6-201208xx-firmware-xxxx..........arm

//Frank

All firmware is the same.
Only unlocking firmware is unit specific.

The latest on YS site is
YS-X6-20120815-firmware-Enc.rar
http://zerouav.net/

Running the YS-X6 in X8, running nice (sorry, posted this on the other thread, but want to show off my YS)

YS-X6 MultiRotor Droidworx: Why? (3 min 18 sec)