Espritmodel.com Telemetry Radio
Reply
Thread Tools
This thread is privately moderated by rc4life85, who may elect to delete unwanted replies.
Old Apr 30, 2012, 09:33 PM
Registered User
Joined Feb 2012
19 Posts
Trader Rating: 11
Wanted
Losi micro 10250kv combo with program card wanted

I'm looking for a micro losi 10250kv combo with program card has to Benin great working condition I know there 50 bucks new but I'm looking for a good deal for a used one pme if u have one
rc4life85 is offline Find More Posts by rc4life85
Reply With Quote
Sign up now
to remove ads between posts
Old May 01, 2012, 06:59 AM
Registered User
Joined Jun 2010
38 Posts
Trader Rating: 7
do you mean the setup for the Micro T's ? I would strongly reccomend not using their ESC, it is horrible, the motor gets no power at all, its the same speed as brushed. I used a hobbywing 25A Esc instead and it was WAY better. They are only $23 on hobbypartz.com http://www.hobbypartz.com/ezrun-25a-...or-rc-car.html

I heard there are motors on hobbyking.com that fit too and are much better.. the losi micro motors are junk! the wires are poorly soldered and they come loose all the time,. I had to epoxy my wires.. Hope this helps!
thesoulcrusher is offline Find More Posts by thesoulcrusher
Reply With Quote
Old May 01, 2012, 09:23 AM
Registered User
Joined Feb 2012
19 Posts
Trader Rating: 11
ok will do so thanx for the tips my friend
Quote:
Originally Posted by thesoulcrusher View Post
do you mean the setup for the Micro T's ? I would strongly reccomend not using their ESC, it is horrible, the motor gets no power at all, its the same speed as brushed. I used a hobbywing 25A Esc instead and it was WAY better. They are only $23 on hobbypartz.com http://www.hobbypartz.com/ezrun-25a-...or-rc-car.html

I heard there are motors on hobbyking.com that fit too and are much better.. the losi micro motors are junk! the wires are poorly soldered and they come loose all the time,. I had to epoxy my wires.. Hope this helps!
rc4life85 is offline Find More Posts by rc4life85
Reply With Quote
Old May 02, 2012, 07:16 PM
Registered User
Joined Jan 2012
20 Posts
Trader Rating: 10
I'll have to deny everything mentioned above. I have the 10250kv motor and losi's esc. I have more than 100 batteries on the motor and its still running like a champ. Also, I am using the largest pinion gear they sell (18t i believe?) and I have had motor temps constantly between 200-230 and no troubles at all. Cogging a little on the start due to the gearing but no problems once its moving! I just suggest NOT buying losi's batteries. They last forever but the connectors wear out and I had on spark at me... But I attacked it with liquid electrical tape and no problems since

Good luck!
JViolet10 is offline Find More Posts by JViolet10
Reply With Quote
Old Jul 05, 2012, 06:14 PM
Registered User
United States, AZ, Phoenix
Joined Jun 2005
101 Posts
Trader Rating: 0
http://www.rcgroups.com/forums/showthread.php?t=1685484
bigdog100 is offline Find More Posts by bigdog100
Reply With Quote
Old Jul 05, 2012, 06:26 PM
Registered User
Joined Jun 2010
38 Posts
Trader Rating: 7
losi esc's are JUNK. Cogging on that little truck is retarded.. the EZRUN is flawless
thesoulcrusher is offline Find More Posts by thesoulcrusher
Reply With Quote
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted WANT Dynam ESC Program Card Item: DY-1014 P.M.S Aircraft - Electric - Power Systems (FS/W) 2 Jul 29, 2012 09:12 PM
Sold Team Losi 1/8 Xcelorin Brushless Combo program card for 1/8 buggy truggy mt trucks boss777 Cars - Trucks and Parts (FS/W) 1 Nov 24, 2011 11:05 AM
Sold Team Losi 1/8 Xcelorin Brushless Combo program card for 1/8 buggy truggy mt trucks boss777 Cars - Cars and Parts (FS/W) 0 Nov 17, 2011 12:47 AM
Sold Team Losi 1/8 Xcelorin Brushless Combo program card for 1/8 buggy truggy mt trucks boss777 Cars - Accessories (FS/W) 0 Nov 17, 2011 12:47 AM
Sold Axi 5320/28 brushless motor, plus Jeti 90 amp opto ESC, Combo deal with program card. CHAMM128 Aircraft - Electric - Power Systems (FS/W) 2 Aug 15, 2008 08:16 PM