Originally Posted by InfinitR

Muscle. 105g each plus prop adapter. They feel smooth, we shall see.

I'm waiting the same motors, hope they work great with flashed esc

I have 2 Align GP780 and I'm waiting 2 Align DS525 Servo, they have good characteristics on paper...

Originally Posted by AliB

https://vimeo.com/54195614

Great video, did it need any post stabilisation?

i think 1 clip was stabilised. rest was straight from the cam

Nice work AliB. Good example of how great the Ecilop is when setup correctly.

Originally Posted by Jelico

Nice work AliB. Good example of how great the Ecilop is when setup correctly.

And flying with no wind around :-)
Anybody has windy video? Still not?
Anyway very good video - nothing to dispute.

when its windy in this country, its rainey or grey with no colour. no point filming.

Lots of wind in some of some of the shots in my video:

Aerial Mix tape (3 min 33 sec)

00:28
00:48
00:55
1:04
2:47
2:55
3:03
3:14 (you can even see the wind in the grass here)

:d:d

Originally Posted by Jelico

Lots of wind in some of some of the shots in my video:
http://vimeo.com/46017001

00:28
00:48
00:55
1:04
2:47
2:55
3:03
3:14 (you can even see the wind in the grass here)

Hmmm, I'm waiting for wind and hope for same results. Great!

Jelico, do you know what your total flight weight is?

Originally Posted by Jelico

Lots of wind in some of some of the shots in my video:
http://vimeo.com/46017001

00:28
00:48
00:55
1:04
2:47
2:55
3:03
3:14 (you can even see the wind in the grass here)

Excellent video (even if you did frighten the horses). All taken with your Ecilop?

yup 100% taken from my Ecilop. All up weight is about 2.2KG.

That video was shot with the following configuration:

Sunnysky 2814 870KV motors
APC 10x 4.7 Props
DJI 30A Opto ESC
DJI Naza (no GPS, original firmware)
Hobbyking HK401B Gyros
Turnigy Mg930 Servos
Turnigy 25c Discharge 5000mah 4s Batteries
Sony Nex 5n with 16mm and 18-55mm lens

I am just about to finish updating my Ecilop with:

Sunnysky 2814 700KV motors
Gemfan 11x4.7 props
Turnigy Mems Gyros
NAZA with GPS and new firmware
Updated frame to V2 configuration
Align DS520 Servos (these will be replaced with MKS ones once they arrive)

It will be interesting to see if the new components change much! I also have a set of Tiger Motors 2216 800KV that I might try soon as well..

Originally Posted by Jelico

yup 100% taken from my Ecilop. All up weight is about 2.2KG.

That video was shot with the following configuration:

Sunnysky 2814 870KV motors
APC 10x 4.7 Props
DJI 30A Opto ESC
DJI Naza (no GPS, original firmware)
Hobbyking HK401B Gyros
Turnigy Mg930 Servos
Turnigy 25c Discharge 5000mah 4s Batteries
Sony Nex 5n with 16mm and 18-55mm lens

I am just about to finish updating my Ecilop with:

Sunnysky 2814 700KV motors
Gemfan 11x4.7 props
Turnigy Mems Gyros
NAZA with GPS and new firmware
Updated frame to V2 configuration
Align DS520 Servos (these will be replaced with MKS ones once they arrive)

It will be interesting to see if the new components change much! I also have a set of Tiger Motors 2216 800KV that I might try soon as well..

mt2216 are not strong enough. but the mt2814 710 work more than well.
i am very interested in your new gyro/servo combination.
tell us how they work as soon as you have them work.

2216 will work if you had hexa frame for quad it not enough power.

In my Project im gonna install 6x Sunnysky V2216 900kv

random question. i have a circular polarised aerial on my vtx... should i have the mushroom pointing up, or down? which is best. everything i see is pointing up, but my head says it should point down because im flying above me..