|Oct 21, 2003, 10:17 PM|
Stevens Aero Cap.. few questions..
I've been thinking of what to power this with..
I have a 300 and a 350 Razor.. I'd like to run an Etec 3S 1200 or TP 3S 2100...
What setups would you reccomend for each motor?
|Oct 22, 2003, 11:37 AM|
RZ-300 C gearbox 9x6 APC E prop - or 10x6 GWS HD prop... 3S1P 1200ET should pull 11A on the bench at sea level... Worked great for me at SEFF.
RZ-300 D gearbox 10x6 APC E Prop or 3blade 9x7 prop from hobby lobby / flying styro... Again - worked well at SEFF. Just under 11.5A on the bench... oh yeah... 3S1P 1200ET I'd bet you could swing the 11" HD prop on this setup.... but torque would be huge...
My preference is the C gearing and smaller 9x6 prop - I'd love to try the GWS 9x5HD prop there as well... The 3 blade prop just looks too cool on there and the 3 blade GWS spinner flows with the cowl very nicely. Vertical is pretty much a non-issue with both setups... You'll have plenty
Hope this helps.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|stevens aero cap 232 rtf||ishu4u||Aircraft - Electric - Airplanes (FS/W)||4||Jul 15, 2003 07:45 AM|
|stevens aero cap 232 pics, post yours||ishu4u||Electric Plane Talk||5||Mar 17, 2003 12:06 AM|
|FS: New in Box Stevens Aero CAP 232||Kevin P||Aircraft - Electric - Airplanes (FS/W)||2||Mar 03, 2003 10:36 AM|
|Stevens Aero Cap 232 S300 - Landing Gear Notice||Stevens AeroModel||Parkflyers||1||Nov 20, 2002 09:49 PM|
|RealFlight Models - Stevens Aero Cap 232's||Stevens AeroModel||Parkflyers||5||Oct 14, 2002 09:49 PM|