HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by tosjduenfs, who may elect to delete unwanted replies.
Old Mar 13, 2012, 12:04 AM
Registered User
Joined Jul 2006
345 Posts
Trader Rating: 12
For Sale
Mini X/+ Quad Frames for sale

These quad frames are made from 1/16" black G10.

All together the frame is approximately 60g.

Motor to motor is 8" adjacent and 11.25" crosswise.

It can accommodate props up to 7 inches.

The frame has holes for CC board (30.5mm square) and for standard KK (45mm square) and the boards can be mounted in + and x configurations.

Comes with all nylon hardware.

Built in motor mounts with standard 16mm and 19mm mounting pattern.

I'm asking 22$ Shipped ConUS

I have enough nylon hardware to make 2 of these. If there is interest in them I will gladly buy more hardware and make as many as people want.

If you have a mill and would like to make it yourself I'm more than happy to distribute the DXF.

Regards,

Mike
tosjduenfs is offline Find More Posts by tosjduenfs
Last edited by tosjduenfs; Mar 13, 2012 at 11:28 AM.
Reply With Quote
Sign up now
to remove ads between posts
Old Mar 13, 2012, 08:59 AM
Registered User
Joe 1320's Avatar
United States, FL, Sebring
Joined Feb 2006
7,405 Posts
Trader Rating: 158
Any chance of doing replacement arms too? The weak spot will be the motor arm just after the brace. If it's like any other quad, that will be the beaking point (which is good...... better than other parts).
Joe 1320 is offline Find More Posts by Joe 1320
Reply With Quote
Old Mar 13, 2012, 09:54 AM
Registered User
Joined Jul 2006
345 Posts
Trader Rating: 12
Yes, I'd be able to make replacements for a couple bucks. That is why I prefer to have seperate pieces for each arm rather than having a frame cut from a single piece.

As far as the arm goes it is quite tough and I tried to keep the length of the arm after the brace to a minimum to reduce the amount of leverage that could be generated in a crash.
tosjduenfs is offline Find More Posts by tosjduenfs
Reply With Quote
Old Mar 13, 2012, 01:35 PM
Registered User
Joined Jul 2006
345 Posts
Trader Rating: 12
There is one frame left for sale. After it is sold I can still make more so long as people ask for them.
tosjduenfs is offline Find More Posts by tosjduenfs
Reply With Quote
Old Mar 13, 2012, 04:58 PM
Dreamer
Australia, TAS, Ulverstone
Joined Aug 2004
2,063 Posts
Trader Rating: 11
International shipping??
kaz1104 is offline Find More Posts by kaz1104
Reply With Quote
Old Mar 13, 2012, 10:14 PM
Registered User
Joined Jul 2006
345 Posts
Trader Rating: 12
Kaz,

I'm fine with that lLet me check what it would cost.

Mike
tosjduenfs is offline Find More Posts by tosjduenfs
Reply With Quote
Old Mar 13, 2012, 11:09 PM
WHEN IN DOUBT FLOOR IT!!!
G-unit's Avatar
AZ
Joined May 2006
4,698 Posts
Trader Rating: 160
Very cool..
G-unit is offline Find More Posts by G-unit
Reply With Quote
Old Mar 13, 2012, 11:36 PM
Registered User
Joined Jul 2006
345 Posts
Trader Rating: 12
Thanks G-unit. I've decide to get some more nylon hardware for these. I should have enough to make about 8 more.
tosjduenfs is offline Find More Posts by tosjduenfs
Reply With Quote
Old Mar 14, 2012, 10:02 PM
Registered User
Joined Jul 2006
345 Posts
Trader Rating: 12
I've got three left ready to ship. PM me.
tosjduenfs is offline Find More Posts by tosjduenfs
Reply With Quote
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale Quad +/x Frames for sale. tosjduenfs Aircraft - Electric - Multirotor (FS/W) 9 Mar 11, 2012 09:29 PM
For Sale MSH Protos frames x 2 KrazyKoots Aircraft - Electric - Helis (FS/W) 2 Mar 02, 2012 11:54 AM
Sold BNF mini quad for sale willi_m Aircraft - Electric - Multirotor (FS/W) 0 Jan 23, 2012 11:55 AM
Sold 2 X multicopter frames for sale. Scarab and tricopter!!!! tc3wins Aircraft - Electric - Multirotor (FS/W) 3 Dec 01, 2011 08:36 AM
Discussion X Frames... Low Cost UK Frames Thepasty Multirotor Talk 9 Oct 10, 2011 07:41 AM