I have finished building a MK DroidWorx AD6-HL that was to be used for a potential job coming up but it doesn't look like this copter is going fit the particular request so here it goes up for sale.

Pictures in a post below
Specs:
DroidWorx AD6-HL (DW dome still has plastic on it, this is all never used)
Mikrokopter FC ME2.1 (setup for Graupner MX-20)
Mikrokopter GPS 2.1 (
Mikrokopter Navi 2.0
6x Mikrokopter BL2.0 in Hexa distribution board (used bullets at the board for easy change outs, or can be swapped to direct connection at your request)
6x AVRoto 2814 Brushless Motors
6x APC 12x3.8 Props
4S 5300 GenAce 30C Lipo

This setup is pretty much identical short of the motors that you would buy from Quadrocopter LLC. for $6481 (without the DX8).

This is programmed for Hexa and just requires your radio setup with the MK tools. If you have any questions feel free to ask.

Price:Reduced: $3850.

edit: XBees removed.

Sid3ways I'd wish you'd keep a picasa/flickr page of your builds. Would love to see them all! Good luck with this sale!

good stuff...... can't wait to see the pics especially of what's under the hood... GLWS!

Very interested and looking to purchase this week. I can also arrange direct pick up.

Please feel free to contact me direct: 734-674-2331. Brad

Or email red1one@comcast.net

I've responded to all parties, they wanted pictures and a found a couple of the build process on my laptop of the copter being 90% complete, just needed motors mounted at that point. I'll have updated pics like I said when I get home in a few days. Picture with the lid still has the wrapper on it that is why it looks not smooth.

looks nice!

two questions.

the frame on the right..what brand/make is that one.

second question.

you mentioned in the original post that you used bullets on the speedo's for a quick change out, but the pic on the left shows direct soldering..were the bullets added later?

thanks

Originally Posted by cryhavoc38

the frame on the right..what brand/make is that one.

I'd say an Xaircraft Hexa

man thats some high grade snuff

Copter is back up on the market so bumping it back up with a slight price drop. From $4150 down to $4050.

Originally Posted by cryhavoc38

looks nice!

two questions.

the frame on the right..what brand/make is that one.

second question.

you mentioned in the original post that you used bullets on the speedo's for a quick change out, but the pic on the left shows direct soldering..were the bullets added later?

thanks

1. Frame on the right was a XA Hexa frame.
2. Bullets are about 3 inches down the line from the ESCs, they are just tucked away you can't see them.

I forgot to post the picture up of the copter, it is programmed for a Hexa and basically just needs your radio setup and she's ready to fly!

Originally Posted by Sid3ways

I forgot to post the picture up of the copter, it is programmed for a Hexa and basically just needs your radio setup and she's ready to fly!

Is this still for sale?