HobbyKing.com New Products Flash Sale
Reply
Thread Tools
This thread is privately moderated by kckn, who may elect to delete unwanted replies.
Old Mar 12, 2012, 02:54 AM
Registered User
Joined Mar 2012
0 Posts
Trader Rating: 0
For Sale
Nitro raptor 50 fully upgraded+ 30 size plus brand new genuine spares, bits and fuel

Just looking to sell my THUNDER TIGER TITAN RAPTOR 50, THUNDER TIGER RAPTOR 30 and ALL THE PARTS, UPGRADES, SPARES, STARTERS and 10L of NITRO HELI FUEL

EVERYTHING IS INCLUDED IN SALE

THUNDER TIGER RAPTOR TITAN 50. with OS MAX SX Hyper .50 power plant w/upgrade exhaust for increased power, Has been upgraded to powerfull Hi-Tec HS-6975HB coreless digital servos (programmable) with Futaba S9254 digital tail servo(x2) and Futaba GY401 S.M.M rate gyro. Also includes battery monitor/harness, header tank, easy glow start extension and blade supports to keep it from being damaged when transporting

This heli is an absolute beast it is top of the line and fully upgraded for precise 3D control [The entire rotor mechanism, i.e.The swash plate, rotor button hub, washout, mixing stabilizer, flybar control, main rotor grip, aileron levers and tail pulley are all metal as well as a metal column servo tray for increased strength, integrity and longer life

The fully illustrated set-up manual is includedl.

Lots of $$$ spent on this awesome little heli. It is extremely rewarding, gratifying and just loves to be flown. It is in excellent condition, it is set-up, ready to go and has never been crashed . Plus all these spare parts to go with the 50 size----

THESE EXTRA PARTS AND SPARES ARE ALL STILL NEW IN PACKAGING.

>>>(Tail supportx2, main frame set x2, skid set x1, fly bar x2, main blades x1, OS heli carby 60L x1, tail pitch x1, main spur gear 85T/R x2, 10T pinion gear v2 x2, ball link 4.8 x1, upper/lower blade grip x1, cooling fan and clutch assembly x1, metal rudder servo tray x2, carbon fibre rudder servo tray x1, anti-skid rubbers x1, body support x1, tail fins x1, main drive shaft x2, spindle x1, muffler tip x1, 3-way fuel valve x2 AND MORE.

>>>12v battery powered field starter to get it going [has no wires to get tangled on and you don't need to lug around a heavy battery] +

>>> approx 10L of Byron Performance Nitro Heli Fuel) !!

>>>And the transmitter > JR X2610 6ch Full digital display transmitter, fully programable for every scenario heli and plane 10 model memory so you can easily switch between different aircraft. It also includes JR 7 ch receiver and jr 9.6v rechargable batt. pack. These are in immaculate condition. It is set up ready to go

>>>And here's a slightly smaller version of the Raptor series to learn on and help you get accustomed with flying (if you are new to the sport of course !) note: This is also a nitro full 3D heli just slightly smaller in scale<<

>>>This one is a Thunder tiger Raptor .30 size 3D heli. Includes OS MAX SZ .37 powerplant w/ Curtis Youngblood powerpipe, only run a few times it has all JR servos, Tower Pro battery monitor flight harness, CSM ICG540 advanced heading lock gyro, fuel filter, header tank, graphite blades and blade support. IT IS READY TO FLY, IN EXCELLENT CONDITION AND HAS NEVER BEEN CRASHED !!

I also have a Thunder tiger Raptor 30 size heli say 95% assembled has full rotor head assembly, blades, tail boom + drive belt w/ carbon fibre tail fins, clutch bell drive shaft etc and futaba servos. Just needs motor, servo mount and gyro to complete

PLUS HEAPS OF SPARES, ALL STILL NEW IN PACKAGING. WHICH MOST ARE LISTED BELOW

brand new metal swash, rotor button hub, washout, mixing stabilizer, flybar control, main rotor grip aileron levers etc.so you can upgrade the rotor/swash system if you wish)

There's also spare Blades, skids/assembly, fuel tanks, drive shafts, clutches and bells, cooling fans, tail fins, brace bars, flybars, blade stabilizer, tail rotors, blade balancers, bearings, gears and just so much more I cannot list. These will keep you up in the air, save you lots of money and heaps of time by not having to run backwards and forwards from the hobby shop ( All spares are genuine and brand new in packaging). . .

This is a regretful sale, I just have no time to fly them anymore and they're in need of a good home.

Every item is in top condition approx. $1000 in parts alone plus you get a couple of awesome helis in the process.


Total spent, just under $4000.00, asking $1700.00 ono. FOR URGENT SALE

0411 348 911 email: kckn@y7mail.com Gold Coast, QLD
kckn is offline Find More Posts by kckn
Reply With Quote
Sign up now
to remove ads between posts
Old Mar 23, 2012, 03:30 PM
Registered User
United States, PA, Chambersburg
Joined Jan 2008
54 Posts
Trader Rating: 8
interested in the Titan 50 or 30 with OS 37. PM if will split up and price of each, Thx
e_brown is offline Find More Posts by e_brown
Reply With Quote
Old Mar 29, 2012, 10:52 PM
Love RC
United States, AL, Leeds
Joined Sep 2010
21 Posts
Trader Rating: 1
I too am interested in some of your spare parts. Everything you have concerning the tail hub assembly, links and linkrods, any pitch control parts and any aileron arms and parts,bearings and screws.
tr911 is offline Find More Posts by tr911
Reply With Quote
Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Brand New Raptor 30 V2 With New Rebuilt O.S 32 RCHSF Aircraft - Fuel - Helis (FS/W) 3 Oct 06, 2011 09:57 AM
For Sale Fully Upgraded Raptor 50 ARF wakeboarder2342 Aircraft - Fuel - Helis (FS/W) 1 May 14, 2006 10:00 PM
F/S Brand New Raptor 50 size Muffler (PV0109) kelnet88 Aircraft - Fuel - Helis (FS/W) 0 Aug 03, 2004 07:48 AM
F/S Brand New Raptor 50 size Muffler (PV0109) kelnet88 Aircraft - Electric - Helis (FS/W) 1 Jun 19, 2004 12:40 AM