Hi gektor - I've tried your GDevention lib, and it looks great!
The visibility outside is greatly improved, and it was very easy to upgrade.
So, thanks

Originally Posted by gektor

Will this work on my Devo 8 with Deviation V2.1.0 ?

Originally Posted by clearprop88

Will this work on my Devo 8 with Deviation V2.1.0 ?

No, it's a library for the original Walkera fw...

That's what I thought.
Thanks.

Where are the Gyro settings on the Devo 10 Deviation 2.1.1 FW?
Is it called Gyro. Heh! I looked but not good enough I guess.

Is it still rumored the next Deviation FW will have a more Devo familiar interface?

Thanks - See my blog for the way we solved the 5055 binding issue on the V400Dor RX2614V-D

Originally Posted by gapi

Where are the Gyro settings on the Devo 10 Deviation 2.1.1 FW?
Is it called Gyro. Heh! I looked but not good enough I guess.

Is it still rumored the next Deviation FW will have a more Devo familiar interface?

Thanks - See my blog for the way we solved the 5055 binding issue on the V400Dor RX2614V-D

Channel 7 is for the gyro. This link will explain everything for you:
http://www.deviationtx.com/forum/how...ustom-firmware

Current interface works fine for me but I never used the WK FW when I got my Devo 10.

Originally Posted by gapi

Where are the Gyro settings on the Devo 10 Deviation 2.1.1 FW?
Is it called Gyro. Heh! I looked but not good enough I guess.

Is it still rumored the next Deviation FW will have a more Devo familiar interface?

Thanks - See my blog for the way we solved the 5055 binding issue on the V400Dor RX2614V-D

Gyro is on channel 7.

Nine Eagle Receiver

Is the f/w compatible with Nine Eagle receiver ? If not, any plan to do so.

Thanks.

Originally Posted by GoElectric

Nine Eagle Receiver

Is the f/w compatible with Nine Eagle receiver ? If not, any plan to do so.

Thanks.

http://www.deviationtx.com/articles/1-welcome

lasakro, do you have a V400 Deviation model? One that's not all 3D I hope?

I just discovered the Deviation Nightlies. I flashed the Devo 10 and found the Model Setup/Mixer GUI/ <Advanced /Standard> options!

Love That Basic. The only thing is it defaults to Advanced and if you have a model you copied in from the System files and swap to Basic it has to reset the Model. I'm hope he will change that.

I am brain dead of the numbers formula. I gotta write it down. Can someone tell me again, your number + 100 - 50 ?

Originally Posted by gapi

Love That Basic. The only thing is it defaults to Advanced and if you have a model you copied in from the System files and swap to Basic it has to reset the Model. I'm hope he will change that.

conversion only works from standard->advanced, not the other way around. Not much we can do about that because standard uses a bunch of assumptions that do not necessarily hold in advanced models.
Deviation will likely continue to default to advanced. Itis the only way to be able to continue using existing models. We could make new models default to Standard, but I am not yet convinced.

As I said elsewhere, do not get too attached to models using 'Standard'. Until I make an official release, I will not guarantee backwards compatibility for this mode.

Originally Posted by PhracturedBlue

conversion only works from standard->advanced, not the other way around. Not much we can do about that because standard uses a bunch of assumptions that do not necessarily hold in advanced models.
Deviation will likely continue to default to advanced. Itis the only way to be able to continue using existing models. We could make new models default to Standard, but I am not yet convinced.

As I said elsewhere, do not get too attached to models using 'Standard'. Until I make an official release, I will not guarantee backwards compatibility for this mode.

Thanks. I'm glad to see it though. I am also liking the Auto thing in the curves. Wow.

I forgot the number system you guys use. Multiply by 100 and subtract 50 or something like that. Please give me those steps so I can sticky them on my desk?

In the Standard pitch curves where I can enter my negative and positive pitch and hit the AUTO, now that is a luxury! But...... do I still need to take my percentage number and do your formula?

Thanks for your patience. I am kind of overwhelmed by the difference in the Devo and Deviation interfaces. I like the way you are bridging the gap though.

You need to thank Suvsuv. He developed the Standard interface entirely on his own, I had nothing to do with it. I'm not sure what you mean by the 'number system' we use, so I'm not exactly sure what you are asking.

I think he's asking how to convert a 0 to 100 scale to a -100 to +100 scale.

If that's the case it's this.

[(the 0 to 100 value) - 50] x 2 = (the -100 to +100 value)