Hello everyone. My name is Joe and I am excited to introduce a new aerial imaging quadcopter, the IFLY-4 made by Idea-Fly. If you have any questions or comments about the quadcopter, please feel free to contact me or post any concerns. We attended the Shenzhen Fair on April 3-5, 2012. Here are some pictures of the show; hope you like it! If you want more, feel free to contact me..

contact:
Tel:86-0755-23110006
Cel:86-0755-13491755649
Email:sales-01@idea-fly.com
Skype:joe520happy
Msn:qwj520happy@hotmail.com
Add:room 215 ShangTang Office Building GongYe Road LongHua Town Bao'an District Shenzhen China.


Videos

IFLY-4 Flying video on Shenzhen Show

BeiJing Model EXPO2012 5 1 (1 min 59 sec)

Flying video of the Ifly-4 on Shenzhen Model Show

IDEA-FLY IFLY-4 ShenZhen Model Show.flv (5 min 12 sec)

Firmware upgrade-- guide video

IFLY-4firmware refresh2012.5.15.avi (2 min 6 sec)

ILFY-4 install video guide before your first fly

IFLY 4 first fly install video (4 min 6 sec)

IFLY 4 GoPro 2 Aerial video

IFLY 4 GoPro 2 Aerial video (4 min 3 sec)

IFLY 4 outdoor 3 level wind fly

IFLY 4 outdoor 3 level wind fly 0 (3 min 42 sec)

IFLY 4 High speed fly

IFLY 4 High speed fly (1 min 14 sec)

IFLY 4 Show on company anniversary

IFLY 4 Show on company anniversary (1 min 45 sec)

IFLY 4Arial video for fun on Park

IFLY 4Arial video for fun on Park (3 min 37 sec)

IFLY 4Hover fly

IFLY 4Hover fly (2 min 48 sec)

this pic is one friend who live in New Orleans took ,and he is the fans of our product ,and very good at shooting photos.haha






Victor and me ,haha WHOLE FLIGHT


FC develop by ourselves, I2C escs; cortex M3 processor; supports acro/autolevel modes. MORE INFO ABOUT FC 1. Centralized design It concludes the sensor such as Controller Chip .gyro and accelerate and so on. besides contains all the component that FC needs ,not only easy to setup but save a lot of space. 2. Advanced arithmetic advanced Integrated navigation algorithm and control algolithm ,improve the Mobility and have a great flying. 3. Interior Low voltage alarm buzzer will start to alarm when the voltage is lower than 10.9 vl that means you don’t need to set any voltage alarm outside. 4. RC Support most of the RC that use the PWM output, adopt the FUTABA standard. 5. Two axis title autostabilization Can compatible with most two axis title ,automatic adjustment the camera mount and camera lens base on the attitude of the flight, make it more stabilize to shoot, Meet the needs of the Aerial lovers . Besides, it can be upgraded and expand Firmware can upgrade online easily , and we reserved the connector of the firmware expand. ESC small enough to set in the arm MORE INFO ABOUT ESC 1. current output persistent current 10A，short time current 15A(less than 10 second) 2. mains input 3 quarter aluminum battery input 3. Connector style High speed I2C digital connector (100khz-400khz) 4. Safer Motor Shaft Lock Protection When the motor seize up or get stuck it will automatic stop the motor output and wait for seconds to reboot, so can Effectively Prevent the burn down of the Governor and motor then effectively protect your safe. 5. No noise of drive Adopt the high speed output, without the buzzing that the traditional Governor makes when it drive. Only can hear the sound of the propeller，that you can pay your attention to your flight ,make you feel so happy to fly. IF2212 brushless outer rotor motor Weight of motor：45g/pcs, especially design for IFLY-4 quadcopter , IF2212 series motor is brushless outer rotor motor that adopt the newest magnet materials ,with more efficiency and bigger load voltage ,and The most exquisite production process ,top quality ,with best performance that you can ever find in the market. Besides, the special one oar clip institutions reduce the distance between prop and the motor, and then avoid the resonate cause by motor rotation and high speed acceleration and deceleration . work with the precision propeller can make the flying more efficiency.

IFLY-CT6 SINGLE AXIS CAMERA MOUNT IFLY-CT6 single axis camera mount adopt carbon fiber as material, work with precision bearing makes it less light, more accurate and more stable, is great for the AP/AV hobby to learn and take the sample, fix for most Card Digital Camera that sell on the market, also can load 9G-12G analog and digital servo ,with high compatibility. 1. High frequency suspension components make the photo shoot more stable and clear. 2. Mechanical camera shutter structure (adjust the camera shutter base on your Camera) 3. Pitchscale of the camera mount can reach ±50 degree (adjust it to meet your need) 4. Camera mount compatible 9G-12G (analog and digital servo) landing geer Battery Dimension: 107mmx34mmx22mm 11.1v 2200MAH 25C 3S1P resistance:3.1-3 weight: 180g charging time:about 1 hour f lying time:10 minutes or so CF PROP
CF props is not included in the whole machine

http://www.goodluckbuy.com/ifly-4-co...ontroller.html
its been on goodluckbuy for a while now.

Cool, more details on flight controller please.
DJI oem? Your own?

Originally Posted by scousethief

http://www.goodluckbuy.com/ifly-4-co...ontroller.html
its been on goodluckbuy for a while now.

Yes, but not the FC (looks like another one in a box, similar to Naza/Bumblebee

nvm, screenshots look like DJI stuff

I like it.

There seems to be a small compartment (ESC's?) in the booms, what are the measurements of this?

And please share some more info on the controller.

I was right, I found this pic on a Chinese forum.

We sold them the component and they DIY themselves

Originally Posted by scousethief

http://www.goodluckbuy.com/ifly-4-co...ontroller.html
its been on goodluckbuy for a while now.

Originally Posted by timecop

Cool, more details on flight controller please.
DJI oem? Your own?




Yes, but not the FC (looks like another one in a box, similar to Naza/Bumblebee

nvm, screenshots look like DJI stuff

This is not DJI oem, we develop it by ourselves,and by now it only support Manual and automatic blancing,we will upgrade it in the future.besides ,the flight mode support 2axis tilt compensation output.

Originally Posted by idea fly

This is not DJI oem, we develop it by ourselves,and by now it only support Manual and automatic blancing,we will upgrade it in the future.besides ,the flight mode support 2axis tilt compensation output.

great, more info then.

Originally Posted by SebastianJ

I like it.

There seems to be a small compartment (ESC's?) in the booms, what are the measurements of this?

And please share some more info on the controller.

Yes,wu put it in the boom,the measurements is 1.5*5cm ,and about the info of the controler I just answered in the last post.

Originally Posted by SebastianJ

I was right, I found this pic on a Chinese forum.

We sold them the component and they DIY themselves

I chatted to their sales guy and got some answers about the FC.
The flight control is their own development;


It uses I2C escs; cortex M3 processor; supports acro/autolevel modes.
If priced correctly could be a cheap starting point into proper 32bit platform.
It might even come with a case/box.

http://v.youku.com/v_show/id_XMzQ5ODA1NjAw.html flying video

nice item， nice guy either

seem to be good
what it will be available?
do you have an idea about price??

Originally Posted by titeuf007

seem to be good
what it will be available?
do you have an idea about price??

It is available now,the price is about 400USD come with the camera mount(the material is carbon fiber),and we can negotiate it if the quantity is big enough