|Feb 27, 2012, 01:23 PM|
USA, NJ, Barnegat
Joined Mar 2005
Trader Rating: 27
Bantam BC6DX II charger
I have a lightly used BC6DX-II for sale. Unlike the earlier BC6DX, which could provide 55 watts on DC, this model gives 90 watts on DC power so it charges higher voltage lipos much more quickly. Of course it can also be powered with a wall outlet. Comes with a/c wall cord, jst/Align balance board and 1 deans ultra charge lead. $65 shipped CONUS
Here's the official write up...
- Dual input power
BC6DX-II employs a circuit that can be operated at AC (Alternating Current) or DC (Direct Current) input power. On AC power the chargerís maximum output power is 50W charging. With DC power input, the chargerís maximum output power is 90W. As a result, it can charge up to 15 cells of NiCd/NiMH and 6 series of Lithium batteries. There may be the limit of feeding current to a higher voltage battery. Please refer 'Maximum circuit power chart'.
- Individual voltage balancer for Lithium batteries buit in
The BC6DX-II has an individual-cell-voltage balancer built in. So it does not need an external balancer when charging Lithium batteries (LiIo/LiPo/LiFe) for cell balancing.
- Balance individual cells on discharge
The BC6DX-II also can monitor and balance individual cells on Lithium batteries during the discharge process. If the voltage of any one cell varies abnormally, the process will be stopped with an error message.
- Accept various types of Lithium chemistries
The BC6DX-II can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry.
- Lithium battery 'Fast' and 'Storage' mode
'Fast' charge reduces the charging time of Lithium batteries and 'Storage mode controls the final voltage of the battery for long time storage.
- Data store/load
Up to 10 data memories. Each memory can be recalled at any time you need without reprogramming.
- Cyclic charging/discharging
Perform 1 to 10 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.
- PC based analysis using USB communication
BC6DX-II offers PC based program can analysis the characteristic of the battery via USB port. It shows a graph of voltage, current, capacity and temperature curves. It also shows the individual voltage of each cell in the Lithium battery pack. The firmware can be upgraded from internet download, when the newer version is released. Optional part # EAC400 is required.
- Robust outer aluminum case & Cooling Fan
High-quality aluminum case is durable and very efficient to cool out the internal heat as well as built in cooling fan.
|Thread||Thread Starter||Forum||Replies||Last Post|
|For Sale bantam e-station bc6dx-11--II PLUS VOLTZ power supply||Gmoetech911||Aircraft - Electric - Batteries & Chargers (FS/W)||1||Dec 12, 2011 08:12 AM|
|Wanted Bantam BC6DX or BC6DX-II||tblount70||Aircraft - Electric - Batteries & Chargers (FS/W)||0||Nov 09, 2011 09:21 AM|
|Sold Bantam BC6DX ACDC Charger Mint Cond||flywoody3||Aircraft - Electric - Batteries & Chargers (FS/W)||1||Feb 22, 2011 12:21 AM|
|Sold For sale- Bantam BC-6 BC6DX 2 Lipo, Nicd, Nimh charger/balancer||Mr Kris||Aircraft - Electric - Batteries & Chargers (FS/W)||3||Jan 29, 2011 06:12 PM|
|Question Has anyone tried Bantam E-STATION BC6DX-II?||liukku||Batteries and Chargers||4||Oct 12, 2010 07:29 PM|