im going to be building 2 depron 1:22,3 scale antonov 225's




its wingspan will be 3.96m (12 feet 11")
the length will be 3.76m(12 feet 4")
im gonna stock up on foam cos im gonna make a mess !
wish me luck cos' im gonna need it

i will be using 6 Changesun 90mm fans
http://www.hobbyking.com/hobbyking/s...an%5FUnit.html


Turnigy XK407 brushless outrunner
http://www.hobbyking.com/hobbyking/s...FInrunner.html


and Zippy flightmax 4s 2200mAh lipo's
http://www.hobbyking.com/hobbyking/s...idProduct=9162


and a 60A speed controller
http://www.hobbyking.com/hobbyking/s...4A%5FUBEC.html

Keenan's going Eukranian! Ant-225 very awsome!

Very Cool Build, K in another few months you'll have all the RC scratch-builders in the U.K. on your payroll building for you . . . . Lol

Thanks double -D
Lol all i know is im gonna need a bigger room LMAO!!!
wingspan will be 3.96m (12 feet 11")

i know im crazy !

You're going to need $200 just in wheels lol

LOl

im gonna add these gyro's on all Axis'
http://www.hobbyking.com/hobbyking/s...5FGyro%5F.html

Forget gyro's : http://www.feiyu-tech.com/product-en.php?id=9&mlist=3

Its awesome

how much is that?

this project will use 14 12g MG servo's for main controls plus flaps and nose steering
http://www.hobbyking.com/hobbyking/s...0%5F10sec.html

BTW check out my site

http://nutsaboutrc.freeforums.org/portal.php

Large Project and Lots of Foam.

lots of foam

you can say that again!

Since you pm'd me:

Stop starting new projects and finish one of those you have already startet. Btw. that would actually be your first completed scratchbuild.

I would really like to see one of your planes fly but have almost given up hope.

what would be my first completed this is a joint project with me and 3 of my flying buddies
my 777 and the CRJ are still a priority the 57 and the 225 are back projects but as the 225 will have more than me working on it it will probably get finished first

Keenan

Originally Posted by k.smith459

what would be my first completed this is a joint project with me a 3 of my flying buddies

What?

Have you guys figured how much a A225 with those Fans will cost? The wheels alone are close to 3 figures. And I guess you're going for retracts? mh? And the Structural reinforcements to keep something of that size together? Cmon, this is not going to work.