First...Blog? - RC Groups

Reply

This thread is privately moderated by SteveSw, who may elect to delete unwanted replies.

Feb 22, 2012, 07:38 PM	#1
SteveSw Registered User United States, NY, Bethpage Joined Nov 2011 57 Posts	First...Blog? Since I don't "Blog" ...Not yet anyway, I figured I use this space to show some of my other builds. Images View all Images in thread Views: 88 Pat Tritle designed Stinson Voyager A really nice thought out design and easy to build. Views: 51 Pat Tritle designed Stinson Voyager Views: 44 Bristol Gyspy Racer Views: 47 Photo of the actual plane. It was a WW1 Bristol M1 that had a Gyspy engine installed by Horrie Miller to go racing down under back in the twenties. Views: 32 Henry Struck Cierva C6 Auto Gyro from the March 1940 Flying Aces magizine. Needs to go on a bit of a diet. Views: 31 Another fine kit from DPC. The Sopwith Pup Views: 30 Herr Fokker D.VII modeled to look like the D.VII flown at Old Rhinebeck Aerodrome in the seventies. Views: 33 Great Lakes Trainer built from Cleveland plans built with corrected landing gear and inverted Menasco engine. Views: 31 Great Lakes Trainer built from Cleveland plans built with corrected landing gear and inverted Menasco engine.
	Last edited by SteveSw; Mar 01, 2012 at 03:37 PM.

to remove ads between posts

Mar 03, 2012, 08:43 PM	#2
SteveSw Registered User United States, NY, Bethpage Joined Nov 2011 57 Posts	Here's another couple Here's another couple Images View all Images in thread Views: 15 RN Fokker D.VIII Views: 14 Henry Struck Taube. Real pretty in the air and a real floater Views: 20 I found a pix of an original one with gauges in the dash that I copied. Must have taken this pix before adding the cockpit coaming. Views: 16 Henry Struck Bleriot. You can get a nice flight if its really calm. The front end has been fixed so many times, I had to remove some noseweight! I really need to build a new fuselage. Views: 17 Gulliows Nieuport. I keep it around to remind me that bricks don't make good flyers

Reply

Return to SteveSw's blog

DRIVE / FLY / SUPPORT

Thread Tools
Show Printable Version Email this Page

Terry, transmitting

All RCGroups content copyright © 1996 - 2013 by RCGroups.com.