26 blader?

Link to that?

Originally Posted by Razors edge 29

26 blader?

Link to that?

He must be talking about this :

http://www.shapeways.com/model/43740...sus-rotor.html

Whoot!

Originally Posted by NitroCharged

Re29, no but am going to drop a 26 blader in my 50mm Hawk for giggles. Aiming for a cool whoosh and not much else as these Hawks will never be speed machines.

Huh???......My Hawk/T-45 scoots along pretty well and can easily do 250'+ loops from level flight...It's almost as fast as my Mini-X...I have a 40 amp ESC in mine so bring on the 26 blade rotor!!!

T 45 3 20 12 (5 min 48 sec)

Kevin

Cool

Must use epoxy

You've been warned lol

Kev

Was that a T28 ?

What Brand?

Originally Posted by Razors edge 29

Cool

Must use epoxy

You've been warned lol

Kev

Was that a T28 ?

What Brand?

50mm T-45--SkyAngel...The Hawk is the same plane just painted in the RAF Red Arrows scheme....I spent about an hour to properly balance the fan and only open 'er up for 5 second or shorter full throttle bursts...Throttle back to allow the motor to cool...It's working for me!!!...Get it from Toysonics...If you order the kit version (less than $45) it comes with the fan AND motor!!!

Kevin

Infusing will be done.

Kevin, scoots along is what mine does on 4S too.

Some models are not publicly displayed in the Shapeways store as they are experimental etc, so I don't bother publishing them in.

but we digress...

Tower is sending me my wings/tail surfaces!!!...I've put off the symetrical wing build for the moment as I would at least like to get a stock version flying first to have something to do a comparison with...I'm thinking about ordering the fuselage and canopy and build another with the symetrical wing so that I can do a direct comparison...I already have an RX and ESC---Just need a fan/motor...

Nitro--I just saw the vid where you guys tried to joust with your jets...Absolutely OFF OF THE WALL!!!....When I'm the cameraman I usually feel safe getting behind the pilot to film as USUALLY the pilot will never hit himself with the plane...With you guys there's NO safe place to hide!!!...Next time---When the guy with the "glider assisted" MiG flies that combo again, get someone to bind the MiG to their TX...Fly the glider and then power up the MiG for some "jet assist"!!!...I have a little bit of mad scientist in me too!!!

Kevin

Lol

No

The other plane in back of car?

Originally Posted by Kevin Greene

50mm T-45--SkyAngel...The Hawk is the same plane just painted in the RAF Red Arrows scheme....I spent about an hour to properly balance the fan and only open 'er up for 5 second or shorter full throttle bursts...Throttle back to allow the motor to cool...It's working for me!!!...Get it from Toysonics...If you order the kit version (less than $45) it comes with the fan AND motor!!!

Kevin

Originally Posted by Razors edge 29

Lol

No

The other plane in back of car?

Yep---800mm T-28..I have an upgraded motor in it...I ordered an extra motor for my BH P-38 and used it on the T-28...WIth an 8x6 APC prop it will literally go vertical out of sight!!!...Of course it's on 4S power....(1000mAh 30C)...SUPER easy to fly but fast as heck when you open 'er up!!!

Kevin

Cool

It looks good

I am part of the PZ Trojan cult lol

Except mine is swinging an 11X7 prop on a Turnigy G10 and on 3S it's unlimited vertical and on 4S it's insane power.

Originally Posted by Kevin Greene

Yep---800mm T-28..I have an upgraded motor in it...I ordered an extra motor for my BH P-38 and used it on the T-28...WIth an 8x6 APC prop it will literally go vertical out of sight!!!...Of course it's on 4S power....(1000mAh 30C)...SUPER easy to fly but fast as heck when you open 'er up!!!

Kevin

Kevin, nice idea - I'll put it to Ozzi next time out!

Originally Posted by Razors edge 29

Cool

It looks good

I am part of the PZ Trojan cult lol

Except mine is swinging an 11X7 prop on a Turnigy G10 and on 3S it's unlimited vertical and on 4S it's insane power.

THANKS!!!...You inspired me to make a flight in the back yard this evening with the T-28...When landing I have to dodge two trees, the dog,not land in the pond, and houses...Makes for a good pilot with spot landing capabilities!!!...Here's a hatcam vid from earlier tonight...It's been terribly windy and rainy here lately...I'm glad to get a flight on ANYTHING!!!...Can't wait to get in the Sabre wing to get my GP Sabre back in the air again.....

800mm T 28 (7 min 46 sec)

Kevin

Does anyone know what the connectors used on the servos are?

Micro Futaba

Originally Posted by D Johnson

Micro Futaba

Any plans to make corrections to the manual on the next printing as far as CG location and control throws?