If you think Biven's trailer is nice, you should see all the goodies in it.

watch in 720p

3D Hobby Shop 42" AJ Slick: Huckin (4 min 36 sec)

Nice work scarface!

thanks

I got a full day of flying in today with the 70" Slick and the 74" Edge. I didn't get any pics of the two, but I go some good ones of (Hugocraft) tearing it up with the 87 Shp.

Originally Posted by simon737
Josh how are you coming along with the 'pop-top'? - I can't get this one figured out, first part is easy - wall - and then i'd have thought hard rudder with a blast of power.....but that doesn't seem to work.


...it's a blender... so, like a normal blender (start rolling left, add burst in right rudder just before full down elevator), just get up a pile of speed and do it going up instead...


So when theKM says full down elevator does that mean pulling "down "on the elevator or pushing 'down" elevatgor.

This video might help with pop-tops.

Pop-Tops with Slow-Motion (2 min 22 sec)

Originally Posted by diggity2424

I got a full day of flying in today with the 70" Slick and the 74" Edge. I didn't get any pics of the two, but I go some good ones of (Hugocraft) tearing it up with the 87 Shp.

thats hugo craft how old is he? or is he just a little person

Originally Posted by wamsy55

This video might help with pop-tops.

http://www.youtube.com/watch?v=Ji0UoD0sCs8

you should do a tut on how to do the thing where its like a roller but your falling and going down in a spiral

Originally Posted by goflyhighrc

Originally Posted by simon737
Josh how are you coming along with the 'pop-top'? - I can't get this one figured out, first part is easy - wall - and then i'd have thought hard rudder with a blast of power.....but that doesn't seem to work.


...it's a blender... so, like a normal blender (start rolling left, add burst in right rudder just before full down elevator), just get up a pile of speed and do it going up instead...


So when theKM says full down elevator does that mean pulling "down "on the elevator or pushing 'down" elevatgor.

in that quote, it's "full down elevator", not "pull"

...down elevator is a push, describing it as a pull would trigger all kinds of OCD problems

Nice flying John.

SF...he's not tall, but he flies BIG....really BIG....

119 rudder servos installed and programmed so they work as a team... Tougher to get perfect than 3 aileron servos with a balsa aileron connecting them....the stiff control links don't allow you to get by with anything less than perfect....I suppose this will be less difficult the next time I do it since I've got it figured out now....

Note the LOW amp draw on output number 2 of the current meter....compared to output number 1 with a blank programmer plugged in.....not bad!! I'm very happy with the setup here. Time to sleep...it's late....

can I fly the 119 at Huckfest?

As long as you dont get it in there tree

Originally Posted by skarface

thats hugo craft how old is he? or is he just a little person

Originally Posted by Bivens

Nice flying John.

SF...he's not tall, but he flies BIG....really BIG....

Bivens is right

I'm only about 5'2" and well the 87shp is huge compared to me. Also I'm too old in my late 20's but I get carded after I shave

I'll upload video soon from the camera on the bill of my hat which you can see in the pics.............