Originally Posted by Inverted-I-Fly

3DHS is the main sponsor so at least we know they will be there, I unfortunately will be at a swim meet that weekend, but maybe I can sneak away for one day

They were the first year as was ADC...neither were there last year....

SteveT

Originally Posted by wamsy55

I converted a 71" gasser to electric by replacing the motor box. It's not bad, but you have to tear everything out. I only did it because I had a to replace the motor box anyways. You could just lighten the existing motor box, and use longer standoffs. I could sell you my 71". To bad the rudder counterbalance was ripped off yesterday.

thanks for the offer but rather get an orginal e-slick if you know what I mean.

Ok I am not going to build it after looking at it again, I would have to buy a new cowl, canopy and motor box. I would like to then buy a new left wing and landing gear. LG is cracked and wing tip got pushed into its self a little bit. So forget it I am not putting it back together. I will have another SHP soon though. (top right corner would be a dog foot)

Keith if you don't want it I would gladly take all rest of the airframe.

Originally Posted by RCAddict16

Keith if you don't want it I would gladly take all rest of the airframe.

For what?

Originally Posted by skarface

Ok I am not going to build it after looking at it again, I would have to buy a new cowl, canopy and motor box. I would like to then buy a new left wing and landing gear. LG is cracked and wing tip got pushed into its self a little bit. So forget it I am not putting it back together. I will have another SHP soon though. (top right corner would be a dog foot)

Is that the Stoned doggie?

I would fix iit and fly it

Originally Posted by Park_aviator

Is that the Stoned doggie?

Go read through the 3rd to last page (not page 3 to the last page, the third to last) of the Hillbilly Huckers thread.

Originally Posted by Park_aviator

Is that the Stoned doggie?

Haha

Originally Posted by RCAddict16

I would fix iit and fly it

ha, the whole fuse is cracked all over the place it it probably would not fly as well, just save your money and by a new one. Plus it would be to much of a hassle for me to ship it.

Oh ok haha. I think I'm going to buy a 48" Edge (really damn good deal btw) and put a Telink power combo in it. 48 incher for $250 http://www.twistedhobbys.com/Power-C...-Telink-48.htm

Originally Posted by RCAddict16

Go read through the 3rd to last page (not page 3 to the last page, the third to last) of the Hillbilly Huckers thread.

I regret that bro... lol

Hey Dad's, I found this funny

COTM - Dad Life (2 min 50 sec)

Thats funny.
One thing I tell you for sure is that you will be one of those guys to the next younger generation whether you believe it now or not, so enjoy it while you can.

Originally Posted by hugocraft

hey wamsy, when you converted your 70" gas slick to e-power, how hard was it to do?

Asking because I'm thinking of doing that to mine but wondering/thinking about how to mount the motor. Then wonder how the CG would be since I have the rudder servo in the tail but I only have one servo doing both elevators.

I'd still rather sell the airframe and just get a new 71" if they ever come back in stock.

Have you seen this?

http://www.rcgroups.com/forums/showt...php?p=22245296

Build and Repair

Originally Posted by Ohio AV8TOR

Thats funny.
One thing I tell you for sure is that you will be one of those guys to the next younger generation whether you believe it now or not, so enjoy it while you can.

Haha, I know I will I'll always be a kid on the inside though

Originally Posted by Park_aviator

I regret that bro... lol

Hey Dad's, I found this funny

http://www.youtube.com/watch?v=fZa7hU6tP_s

Haha my cousin showed me that last year its pretty funny