No I drilled them out

I had a small step bit that worked perfectly (only down side is that I lost it about a month ago, just hope I dont have to do it again before I buy another one)

Originally Posted by SteveT.

Anybody have a set of wheels/tires for the 71" Slick? I was thought I was sent some small ones in my 74" Edge, and when I just opened up the hardware for my 71", I see that indeed they are smaller than what they are supposed to be. The Slick ones seem to be the correct size, and I would order some from 3DHS, but they are out of stock.

So, I would gladly pay somebody for set if you have a spare set new or lightly used....

Thanks...

SteveT

I have three brand new sets of wheels for the 71" slick.... you can have a set for free just PM me. My field is so rough i have gone to 4" wheels with alum hubs on all my slicks.

Vyper Bipe in Motion

3DHS Vyper Bipe pilot Joe Smith (6 min 2 sec)

Maybe it's not "Vyperware" after all.

Originally Posted by SD One.

Maybe it's not "Vyperware" after all.

Now that is hilarious.

Originally Posted by jsmith285

Vyper Bipe in Motion

http://youtu.be/Fbq_TGCXATU

Awesome!!

Originally Posted by jsmith285

Vyper Bipe in Motion

http://youtu.be/Fbq_TGCXATU

order button.......i'm ready

Originally Posted by jsmith285

Vyper Bipe in Motion

http://youtu.be/Fbq_TGCXATU

Nice....must be a Hobby King plane...

Originally Posted by SD One.

Maybe it's not "Vyperware" after all.

Yes it is...

Originally Posted by FireyFate

Now that is hilarious.

Yup....

Originally Posted by diggity2424

Awesome!!

Yup +10

Originally Posted by Inverted-I-Fly

order button.......i'm ready

Nah.....never going to happen....it's all smoke and mirrors!!

SteveT

+1 on the MPI's. Great wheels. The only things is the hub adapters were a little tough to drill out without them spinning in the wheel.

Originally Posted by lammbn

I have gone through three wheels due to my harrier landing abuse. The plastic hubs dont seem to be as strong as they used to be. If i where you i would use this opportunity to upgrade to the mpi aluminum hub wheels from rcdude. I have them on my 48 and they are spectacular. Very light and can really take some abuse. I will be upgrading my 71 and 74 as soon as the funds become available.

Originally Posted by jsmith285

Vyper Bipe in Motion

http://youtu.be/Fbq_TGCXATU

SWEET!

closed

is there a release date for this plane yet? I thought it was supposed to be released by now.

Originally Posted by jsmith285

Vyper Bipe in Motion

http://youtu.be/Fbq_TGCXATU

Originally Posted by jsmith285

Vyper Bipe in Motion

http://youtu.be/Fbq_TGCXATU

How come it seems like it flys like every other 3DHS plane?
Same video, everytime, just a new different sound and color scheme/size.

Originally Posted by going4speed

+1 on the MPI's. Great wheels. The only things is the hub adapters were a little tough to drill out without them spinning in the wheel.

That's what lathes are for...

SteveT

Originally Posted by alexjschauer

How come it seems like it flys like every other 3DHS plane?
Same video, everytime, just a new different sound and color scheme/size.

because Joe Smith is always flying