|Jan 31, 2012, 06:36 PM|
FS: Nitroplanes RQ-11 Raven LPU in Marietta, GA
Cross-posted from FPV section.
Flown less than 5 times but I have too many planes in my apartment so this will go. It is in good shape with minor wear from landing, flight, etc. It has some holes and velcro attached as it was used for FPV. It is partially pre-wired for fpv and includes a fiberglass pan/tilt for a board cam if you want it (with servos) and has wires routed through the boom for a video transmitter in front of the vert stab.
465 sq.in. wing area
3 channel control (rudder, elevator, throttle)
Fiberglass fuselage with wood framework
Balsa wings and tail surfaces with covering
EFlight Park 480 1020kv motor
2 x 9g Servos
Detrum 30A ESC
So basically PNP (add your Rx, battery, and fly)
If you want it without motor, escs, and P/T mechanism, I will take $70 for it.
Please feel free to email me with questions. May be interested in trading for other FPV equipment such as 1.3ghz VTXs or cameras, OSDs, a Canon 430EX II Flash... cash can be booted either way for the trade.
More pictures are here:
Last edited by Derek_S; Jan 31, 2012 at 08:47 PM.
|Feb 01, 2012, 07:18 PM|
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||FS: Nitroplanes RQ-11 Raven LPU in Marietta, GA||Derek_S||FPV Equipment (FS/W)||7||Jun 02, 2012 12:39 PM|
|Discussion||RQ-11 Raven RC Drone||hobbypartz||Nitro Planes||0||May 16, 2011 01:53 AM|
|Discussion||New RC indoor track\Hobbyshop (HotshotRC) coming soon to Marietta GA||epoweredrc||Atlanta Area RC||17||Apr 28, 2011 10:49 PM|
|Discussion||New Raven RQ-11||flyinhigh7||FPV Talk||26||Dec 28, 2010 11:53 AM|
|Question||Indoor flying in Atlanta, Marietta, Kennesaw GA?||Neil_SC||Atlanta Area RC||5||Apr 04, 2007 03:26 AM|