Originally Posted by planesilver

Other upgrades are a 1/2 in. to the rudder and a new canopy ,and a new pilot...You may have seen his grandfather in the movies
...Wilson senior starred in the the Tom Hank's movie "Castaway"Attachment 4890495 This is "Wilson Jr." ....

Attachment 4890496

Sweet love the canopy How hard was it to make?
Oh you need a cam in front of Wilson JR

I just looked at your tail feathers and looks good but I am glad to see the background looks like my work area messy.

Originally Posted by scottdearinger

Hope to fly today and get some gopro to gopro-air to air- plane to plane footage....been rained out last couple days

Oh it will happen can't wait.

Originally Posted by eckace1

Sweet love the canopy How hard was it to make?
Oh you need a cam in front of Wilson JR

I just looked at your tail feathers and looks good but I am glad to see the background looks like my work area messy.

Yes, now that you mention it ...I would like my kitchen table back at some point this year !!! The problem stems from, Oh well,you know the story I'm sure you heard it before,,, Way to many planes,to many under construction, and on and on...
The canopy is from parkflyerplastics.com they have it and a bellyskid plate for $10 plus shipping ...very nice just search Multiplex ,they even have an instructions page...

Here's a few shots of the canopy and Wilson Jr.

Here's a link http://parkflyerplastics.com/cart/in...word=multiplex for the canopy & skidplate...

Hey ECKACE, Thanks for showing me how to upload photos,now you guy's are in for it...I have some great video....wanna try for 2 outa 2 .....I'd like to post a flight or two,maybe the great "spiral of death " vid

Scott, Eckace et al... as we discuss multicam EZ I'm reminded of this post from the 808 #16 thread with a super tip to prevent peeling off the velcro when remove cameras or other devices:

http://www.rcgroups.com/forums/showp...postcount=4575

I use a pencil soldering iron to melt a 1/8" boarder ( 2 hooks wide ) .

If you buy your velcro in long ribbons you may find 2 factory edges already "fixed" as per image.

Originally Posted by planesilver

Hey ECKACE, Thanks for showing me how to upload photos,now you guy's in for it...I have some great video....wanna try for 2 outa 2 .....I'd like to post a flight or two,maybe the great "spiral of death " vid

As long it is on vidoe its all Good Oh Scott is the video guy and editer .

Originally Posted by Radio.Active

Scott, Eckace et al... as we discuss multicam EZ I'm reminded of this post from the 808 #16 thread with a super tip to prevent peeling off the velcro when remove cameras or other devices:

http://www.rcgroups.com/forums/showp...postcount=4575

I use a pencil soldering iron to melt a 1/8" boarder ( 2 hooks wide ) .

If you buy your velcro in long ribbons you may find 2 factory edges already "fixed" as per image.

Attachment 4890743 Attachment 4890744

Good tip but I use 3m90 or hot glue.

Originally Posted by planesilver

Hey ECKACE, Thanks for showing me how to upload photos,now you guy's in for it...I have some great video....wanna try for 2 outa 2 .....I'd like to post a flight or two,maybe the great "spiral of death " vid

Upload the vid to YouTube or Vimeo. Then copy and past the link in your post. It will show and play in the post.

Originally Posted by 2500GENE

Upload the vid to YouTube or Vimeo. Then copy and past the link in your post. It will show and play in the post.

Got it !! I'll be posting soon !!!

Get more popcorn 20 minutes more and vimeo will have it ready ....This is worse than waiting for the cable guy !!Git-er done !!!

Well,here it is a last !!

Broken wings (3 min 46 sec)

Originally Posted by planesilver

Well,here it is a last !!https://vimeo.com/42899233:popcorn::...:eek::popcorn:

We have all been there and yes try and fix it might not be as hard as you think.
If worse come to worse buy a new fuse.

Originally Posted by planesilver

Well,here it is a last !!

God, now I have 3 Bob's to deal with.

Just sweep up the parts and glue it all back together. Could have been worse. Could have been my plane.

But seriously, nice video and sorry bout yer crash.

Originally Posted by eckace1

We have all been there and yes try and fix it might not be as hard as you think.
If worse come to worse buy a new fuse.

This was a year ago..This is my first EZ in the video ,it was repaired ,crashed ,repaired and so retired.. But,I put everything in the new EZ ,flew it out of Tx range,Painted the wings neon yellow and started upgrading as you can see..This is my goto flyer....Guy's at my club are starting to notice I stay up in the air so long I'm dehydrated when I bring it down... I can't wait to try out this new power system , 23 oz of thrust WoW !!! That's twice what it had I was using a MD -80 thumb cam ,but now I mount a keychain cam uder the wing in two spots ,out on the wing and next to the fuz under the wing....The md-80 was mounted in the canopy on the 1st one.I like both mountings,so I'll build another canopy for the md-80 ,I think I'll order a HK,God ,this is addictive is'nt it...Is there a support group for this It's been raining or windy since I did the upgrade's over a week now .......The agggony ......