I got this heli for Christmas - Hk 450GT

http://www.hobbyking.com/hobbyking/s...dProduct=16621

I'm now putting together a list of parts to complete it. What do you think of these selections?
I've seen many possible combinations on this forum & this is what I've come up with what HK has in stock currently.

http://www.hobbyking.com/hobbyking/s...g_0_14sec.html Cyclic servos

http://www.hobbyking.com/hobbyking/s..._0_07sec_.html Tail servo

http://www.hobbyking.com/hobbyking/s...EMS_Gyro_.html Gyro
http://www.hobbyking.com/hobbyking/s...or_3850kv.html Motor

http://www.hobbyking.com/hobbyking/s...2_H45059_.html Pinions


What do you think of these selections? Any better alternatives? I'm not too sure about my selection for the Gyro or the motor.

I'll be using my DX7 for a transmitter.

Thanks for any suggestions.

the motor is fine , i have the 4400kv of that motor and works great. the gyro i would get the hk 401 , as for the tail and cyclic servos get the corona 919 for cyclic and the hd http://www.hobbyking.com/hobbyking/s...8kg_07sec.html

or the http://www.hobbyking.com/hobbyking/s...g_0_07sec.html

but use it at 5.1v or less about 4.8v . people have been reporting at 6v its burning up . esc i have had good luck with the turngy plush or basic 40 amp with the 3 amp bec, and get the programing card , makes life easier.
good luck