|Dec 22, 2011, 12:51 PM|
Carbon Z yak 54, 3DHS 48" Velox VR1, E-FLite Mini Edge
Clearing out some Planes to make room for my next project. I've bought/built 11 planes this year and these just never seem to make it out to the air field.
1. YAK IS SOLD E-flite Carbon Z yak 54 Never crashed but some hanger rash. Out of these planes this one has seen the most flights and it flys great! Fast and tons of power. Comes PNP with the stock battery. Just add a RX. Still have original box to ship it in. I have changed the motor mount to the better cnc mount. Original mount broke and I didn't trust HH new replacement. I also changed the Prop to the APC 13x6.5 and put a better prop adapter and spinner on it. The original stuff just would not balance. You could also run the APC 12x6 or 12x8 for more ground clearance. I also changed the rear wheel to a Dubro rubber wheel. Stock servos, esc, motor.
$200 LPU or buyer pays the actual shipping.
2. 3DHS 48" Velox VR1 with the Omega 130g, Currently set up for 3s with a 14x7 APC prop. You can run 4s with a 12x6 apc. I built it from a new kit in July and flew it 3 times then hung it up in the garage. I was saving it as a back up for my 300 SHP but I don't see me needing it anytime soon. Never crashed or landed hard. Plane is set up with the pull-pull rudder. Will include a new set of extended arms, extra set of wheel pants, spare parts bag, and decal sheet. No Servos, esc, rx, batt. I did have to change the blind nut in the left wing as the original was not threaded so it has a allen head and washer instead of a plastic thumb screw.
$225 LPU or buyer pays the actual shipping.
For $300 I'll leave the 4 hs-65mg servos that are currently in it.
For $380 I'll leave the CC ICE 50 ESC and CC bec in it as well.
3. E-Flite Mini Edge. 37" wingspan. Motor upgraded to a Park 480 1020kv motor spinning a APC 11x7 sf prop. 4 Spektrum s75 servos installed. Wheel pants have some damage, was there when I bought it. Flys great on a 3s 2200. No RX, batt, or esc.
Update: I dug around and found a Blitz rc 40 amp esc. A friend gave it to me some time back and I've never used it in a plane, but I did bench test it and used it to test motors and servos a few times and it seems to work fine. No physical defects. Free with the plane if you want it, but I urge you to test it yourself as I do not know the history behind it.
$150 LPU or buyer pays the actual shipping.
Cash, Paypal, or US postal MO.
PM Zip for shipping quote.
Last edited by GlockDoc; Dec 26, 2011 at 10:32 PM.
|Dec 23, 2011, 07:53 PM|
Yak is sold.
I have decided to remove the Velox for now. The mini edge will be re-listed as a bnf plane. PM me if your were interested either.
Last edited by GlockDoc; Dec 26, 2011 at 10:36 PM. Reason: Closing
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|New Product||E-flite Carbon-Z Yak 54||molenjin||Serbia||3||Dec 27, 2011 03:03 PM|
|Wanted||E-Flite Carbon-Z Yak 54 BNF / RTF Wanted||trasher_can||Aircraft - Electric - Airplanes (FS/W)||1||Dec 13, 2011 09:18 AM|
|Sold||E-Flite Carbon-Z Yak 54 w/AR8000 + TM1000, 3 x 4C lipos $249 shipped||jpt1205||Aircraft - Electric - Airplanes (FS/W)||0||Dec 03, 2011 01:28 PM|
|Sold||E-Flite Carbon-Z Yak 54 LPU||jimmy34256||Aircraft - Electric - Airplanes (FS/W)||1||Dec 03, 2011 12:12 PM|
|Sold||E-Flite Carbon-Z Yak 54 BNF||Hossinarizona||Aircraft - Electric - Airplanes (FS/W)||6||Sep 27, 2011 09:00 PM|