|Dec 11, 2011, 03:17 AM|
Multiplex Easy Star / Sky Surfer / Bixler Adjustable Aluminum Motor Mount
This CNC machined aluminum two piece mount is designed to adapt a large range of outrunner motors to the Multiplex Easy Star. It will allow for three different motor mounting heights to accommodate propeller sizes ranging from 6" to 8".
With this feature you can easily run a lower KV motor with a larger propeller for more thrust and better efficiency. This would be a perfect combination for FPV pilots looking for longer flight times and a more quite platform.
Swapping motors from a 35mm outrunner with an 8" prop to a 28mm outrunner with a 6" prop can easily be done by removing a few screws. This is ideal for those looking to achieve the best performance possible.
Position 1: stock height up to a 6" prop.Compatible Motors:
28mm OutrunnerAcceptable bolt patterns (mm): 16x16, 16x19, 19x19, 19x25, 25x25
Due to the large variety of compatible motors, please verify motor size and KV will suite flying style. Contact me for any questions regarding motor compatibility
Three step installation:
1. Glue motor base tube into the fuselage (nacelle) making sure mounting flange is square.The fit and quality of these mounts are excellent. These are manufactured by smallpartsCNC. Please visit my website at Small Parts CNC for more rc products.
Included: 1 - Motor Base Tube and Motor Plate, 4 motor screws and 4 mount screws.. Weight: 20gNotes: A 35mm outrunner motor will only fit in Position 3 (+ 1.0"). 28mm outrunners will work in any of the three positions. The stock thrust angles are retained in all 3 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations.
Price is $15.95 ea. with a fixed shipping of $2.00 in the US and $4.00 International. Send me a PM if you are interested or have any other questions.
Thanks for looking!
|Dec 11, 2011, 11:54 AM|
A blended nacelle would be a nice touch. With a simple block of foam, some CA and light grid sandpaper I could see something pretty nice shaped up in very little time. Plus it would be extremely light.
These have been pretty popular so far. I ran a large batch a few weeks ago, and am setting up this week to run another. But I still have plenty in stock.
Thanks again for the nice comments.
|Dec 11, 2011, 03:02 PM|
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Sky Surfer or HK Bixler???||fpsazerbaijan||Electric Plane Talk||11||Mar 17, 2012 05:43 AM|
|Wanted||28mm 2200kv Inrunner for EZ Star/Bixler/Sky Surfer||Rocketman1092||Aircraft - Electric - Power Systems (FS/W)||2||Dec 05, 2011 03:18 PM|
|Sold||1800kv Motor/prop for Sky Surfer / Bixler / Easy Star||tdab||Aircraft - Electric - Power Systems (FS/W)||1||Nov 01, 2011 04:46 PM|
|Discussion||Sky Surfer front motor mount||mike20grandi||Electric Motor Design and Construction||0||Sep 14, 2011 05:57 PM|
|Sold||Bixler Sky Surfer Hawk Sky ARF or complete kit||porcia83||Aircraft - Electric - Airplanes (FS/W)||1||Sep 14, 2011 09:24 AM|