HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Jan 13, 2013, 07:16 AM
Registered User
helizrnew2me's Avatar
United States, PA, Slatington
Joined Sep 2010
1,866 Posts
what quad do you have naamis?are your esc`s and motors 4s capable?
helizrnew2me is offline Find More Posts by helizrnew2me
Reply With Quote
Sign up now
to remove ads between posts
Old Jan 13, 2013, 08:25 AM
Registered User
Joined Sep 2011
16 Posts
Quote:
Originally Posted by helizrnew2me View Post
what quad do you have naamis?are your esc`s and motors 4s capable?
Gaui x500 frame with x330 scorpion motors and escs. The motors are 3s but the escs 3-4s. Basically just testing out the setup. The main issue with the motors would be over heating... The again, it's way below freezing here...
Naamis is offline Find More Posts by Naamis
Reply With Quote
Old Jan 13, 2013, 11:27 PM
Registered User
United States, MA, Springfield
Joined Dec 2010
575 Posts
if i make quick random movements or i hit one of the arms it will start trembling like a bee. anything i could change so it recovers and levels again?

i used 230mm PID setting for 240mm quad.

Roll*Pit_P 60
Roll*Pit_I 14
Roll*Pit_D 75
scub is offline Find More Posts by scub
Last edited by scub; Jan 14, 2013 at 01:19 AM.
Reply With Quote
Old Jan 15, 2013, 05:21 AM
Registered User
Joined Jun 2012
52 Posts
Hello

I know I've read somewhere a way to transform a FreeFlight board into a standalone gimbal controller using Timecops multiwii firmware port, but I can't find where than info was… can somebody please tell me the necessary steps to do this…

Please could the info be in "For dummies" kind of language, since I've never used a Multiwii firmware or anything like it…

Thanks a lot…
Diafragma1939 is offline Find More Posts by Diafragma1939
Reply With Quote
Old Jan 18, 2013, 06:23 AM
crashing is how I learn....
Mybrains's Avatar
Long Reef, NSW, Australia
Joined Dec 2004
25 Posts
MMC10 boards <$35

Hi Guys,

I am flying a white 1.3 board but noted a supplier that de bundled the USB interface and is selling the flight board for $34.77atm. Cheapest freight is 4 bucks...
http://www.himodel.com/multi_rotors/...ontroller.html

PS any firmware later than 1.31 out yet and where on QQ groups do these guys post (Google chrome will auto translate chinese to english for us to read)
Pete
Mybrains is offline Find More Posts by Mybrains
Reply With Quote
Old Jan 24, 2013, 04:32 PM
2Vision-Air
bakchos's Avatar
Canada, QC, Blainville
Joined Aug 2009
2,151 Posts
Hey guys, i have a spare FF V1.22 (white board) , i dont have the programmer or the wires that were included with it, i still use one on my quad and i need to keep the programmer.

To be honest i have no idea what these boards are worth now, i paid 50 + shipping 2 years ago.

If someone with a programmer would like to have a 2nd board, just make me an offer and i will take it out of the dusty bin !

I will film the connection and show that it works before sending of course.

i am in Canada, Quebec.

Thanks !
bakchos is online now Find More Posts by bakchos
Reply With Quote
Old Jan 25, 2013, 03:15 PM
Registered User
Joined Jan 2013
1 Posts
Hi!

I have probleme with FF board V1.31 from ebay (vulcano sealer; unfortunately i have seen warning comment to late)

first start just blue led on, and buzzer on everytime, impossible to connect computer (port is ok but no com)
impossible to flash, imposible to set up, impossible to fly,

I need help please!!
GM74 is offline Find More Posts by GM74
Reply With Quote
Old Jan 26, 2013, 11:46 AM
Registered User
Joined Sep 2012
5 Posts
Quote:
Originally Posted by Diafragma1939 View Post
Hello

I know I've read somewhere a way to transform a FreeFlight board into a standalone gimbal controller using Timecops multiwii firmware port, but I can't find where than info was… can somebody please tell me the necessary steps to do this…

Please could the info be in "For dummies" kind of language, since I've never used a Multiwii firmware or anything like it…

Thanks a lot…

I'm also looking for a gimbal solution with the ff board. I'm also looking for the thread with multiwii software from timecop.

Please send a link guys :-)
raceagain is offline Find More Posts by raceagain
Reply With Quote
Old Jan 26, 2013, 05:43 PM
Registered User
United States, TX, Richmond
Joined Aug 2010
1,281 Posts
Quote:
Originally Posted by bakchos View Post
Hey guys, i have a spare FF V1.22 (white board) , i dont have the programmer or the wires that were included with it, i still use one on my quad and i need to keep the programmer.

To be honest i have no idea what these boards are worth now, i paid 50 + shipping 2 years ago.

If someone with a programmer would like to have a 2nd board, just make me an offer and i will take it out of the dusty bin !

I will film the connection and show that it works before sending of course.

i am in Canada, Quebec.

Thanks !
GoodluckBuy.con now sells the USB programmer. Do a search on FF-C10
rcjose is offline Find More Posts by rcjose
Reply With Quote
Old Jan 26, 2013, 05:47 PM
Registered User
United States, TX, Richmond
Joined Aug 2010
1,281 Posts
Quote:
Originally Posted by GM74 View Post
Hi!

I have probleme with FF board V1.31 from ebay (vulcano sealer; unfortunately i have seen warning comment to late)

first start just blue led on, and buzzer on everytime, impossible to connect computer (port is ok but no com)
impossible to flash, imposible to set up, impossible to fly,

I need help please!!
Here is the english manual I wrote. It;s also linked on the fiurst page of this thread. Follow it step by step.


If you connect the USB programmer to your pc and the FF board first and then power on the FF board. you are in "Normal" mode and can use the ZNS appkcation to pogram it.

If you power up the FF board and then connect and power up the USB programmer, youy will be in "Boot" mode and can re-flash firmware.
rcjose is offline Find More Posts by rcjose
Reply With Quote
Old Jan 26, 2013, 05:48 PM
2Vision-Air
bakchos's Avatar
Canada, QC, Blainville
Joined Aug 2009
2,151 Posts
Quote:
Originally Posted by rcjose View Post
GoodluckBuy.con now sells the USB programmer. Do a search on FF-C10
Thanks, but i am not looking to use it, i was asking if someone wants to buy it from me
bakchos is online now Find More Posts by bakchos
Reply With Quote
Old Jan 26, 2013, 09:49 PM
Registered User
danger_mouse's Avatar
Australia, QLD, Gatton
Joined Jan 2007
931 Posts
Quote:
Originally Posted by raceagain View Post
I'm also looking for a gimbal solution with the ff board. I'm also looking for the thread with multiwii software from timecop.

Please send a link guys :-)
Search timecops posts earlier in this thread as well as look here and here.
danger_mouse is offline Find More Posts by danger_mouse
Reply With Quote
Old Jan 27, 2013, 12:34 PM
Registered User
Joined Sep 2012
5 Posts
Quote:
Originally Posted by danger_mouse View Post
Search timecops posts earlier in this thread as well as look here and here.
OK, I was looking for these pages. But I'm not a specialist. So I'm looking for a step by step procedure to get my ff-board running with the multiwii software.

To adjust that board will be possible for me.

May someone can help me to get such a step by step procedure?

I have a win7 laptop, the original usb-programmer from goodluckbuy.com and I bought the board in march 2012.

I don't know what more info's you need.........

guys, thank you very much for help-post.
raceagain is offline Find More Posts by raceagain
Reply With Quote
Old Feb 03, 2013, 01:06 AM
Tony C
South Island, New Zealand
Joined Feb 2010
29 Posts
Quote:
Originally Posted by bakchos View Post
Thanks, but i am not looking to use it, i was asking if someone wants to buy it from me
Hi,
Have you sold it? and if not, are you interested in posting it to New Zealand?
I've already got one which is working great and a spare would be good.
Tcabw is offline Find More Posts by Tcabw
Reply With Quote
Old Feb 25, 2013, 07:20 AM
Registered User
Joined Jul 2012
4 Posts
Hi All,

I have a hexacopter from sdshobby.com with the mmc10 flight control board.
They tell me that it's RTF but I want to fine tune it.
In fact the first time it flew I couldn't control the hexa.
Can anyone tell me if this board controls 6 motors?
When I connect the control board to my pc motors 5 and 6 don't work, only 1 thru 4.
I can't find anything on this subject.

Thanks.
rotorlens is offline Find More Posts by rotorlens
Reply With Quote
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Complete MultiWii Quadcopter Flight Controller madushan2008 Aircraft - Electric - Multirotor (FS/W) 3 Aug 11, 2011 08:25 AM
Sold FY90Q Flight Controller for Quadcopter - $70 shipped jpsabo Aircraft - Electric - Multirotor (FS/W) 1 Jul 29, 2011 10:21 AM
For Sale Complete MultiWii Quadcopter Flight Controller Kit madushan2008 Aircraft - Electric - Multirotor (FS/W) 7 Jul 26, 2011 08:58 AM
Sold Multi Wii flight controller with auto level ver 1.7 tc3wins Aircraft - Electric - Multirotor (FS/W) 1 May 08, 2011 01:02 AM
Video Trex SE...3d flight with auto Nick Maxwell Electric Heli Talk 10 Dec 18, 2006 09:23 PM