Hello all. Iīve tested the new 1.22c version and nothing. The 1.1, thanks Juergen, and also nothing. The 1.0.7 setup client itīs the same 1.0.5. You can install and see.
I donīt know if I make some mistake.
Yesterday I downloaded the last flycam naviboard firmware with the Flash loader tool and perfect.
In the FF with all the firmwares when I connect the battery the blue led is on and the red one is blinking...

Originally Posted by JUERGEN_

YES,



switch activates the chip-bootloader. (via, Flash_Loader_Demonstrator from ST)

no Problem.

----------------------------------------------------

ARDUINO forget !
the future is STM32 - CORTEX.

Yes which has been the case for about two years or so.

Arduino has announced their Atmel Arm version which is called "Due" - probably "overdue" or "way past due" so at least there is a sense of humour in there somewhere.

It was supposed to come out in late 2011 which is now last year. I think there may just be some issues with the libraries .

All good fun.

Greg

Originally Posted by gke

Yes which has been the case for about two years or so.

Arduino has announced their Atmel Arm version which is called "Due" - probably "overdue" or "way past due" so at least there is a sense of humour in there somewhere.

It was supposed to come out in late 2011 which is now last year. I think there may just be some issues with the libraries .

All good fun.

Greg

Arduino "due" is already obsolete and it's not even released yet. SAM3U has been obsolete the moment it was released as there were better cortex M3 chips at that time. SAM4 with cortex M4 and hardware fp isn't out yet (I think?) while both STM and NXP have working M4 silicon for months...

And as for libraries.. It's pretty hard to dumb down a platform to the level of tarduino....

finally got the board to arm - easier than it first appears

Despite having 3 LEDs, there appears to be no indication that it is armed or not...

PWM output rate is ~350Hz but has slightly odd range 900uS -> 1650uS
seems curtailed at the high end (?)

Originally Posted by JUERGEN_

I've got new 1.22c firmware
- with guarantee -

no problem.

so the news software works?
does it really better?

Originally Posted by titeuf007

so the news software works?
does it really better?

Some posts above you can see in my board, no.

Originally Posted by titeuf007

so the news software works?
does it really better?

better than , Posted by snapper1234

the news software works.

Originally Posted by JUERGEN_

better than , Posted by snapper1234

the news software works.

Please, can you show me how I make it to work?

Here is 1.11, 1.20 & 1.21 firmware

Originally Posted by ernes

please, can you show me how i make it to work?

+1

So how many of you got a bricked board already with this "new" firmware?

Originally Posted by Ernes

Please, can you show me how I make it to work?

-
-

thanks juergen it s very nice!
timecop:i have the "old" firmware..

Gents,
Is there any documentation on what changes are in the firmware versions? Newer versions are not necessarily better...
@Juergen,
I noticed your flash loader capture shows a different TEST and v122 firmware in the upload and download windows. What is the story there?
Cheers,
Jim
Quadrocopter and Tricopter Mega Link Index

Top part is flash to, bottom part is read from (the chip).