Here's a few photos of the New Dynam Sbach 342 available now at Nitroplanes.com. The RTF version sells for $189 and the ARF $139. Dynam planes are great value for the price and they are great flying aircraft.

RTF:
http://www.nitroplanes.com/60a-dy894...2-rtf-24g.html

ARF:
http://www.nitroplanes.com/60a-dy8945-sbach342-arf.html

Best,
Tony

Grayson hobby says they will be getting these in next month from what I've heard secondhand. Have you seen confirmation on if Nitroplanes will be getting these?

Nitroplanes stated that a flight review of the Dynam Sbach 342 was coming soon. The first photo I post here came from the Nitroplanes. A December release is probably right.

Best,
Tony

need some more info on it..... how big? weight? wood or foam? 45-50" would be perfect for my lectric stuff i got sittin here.

foam according to the dynam site

looks great!

Yes, see here:

http://www.dynam-rc.cn/Products_view_142.html

Specs:

wingspan:1250mm
length:1235mm
motor: BM3720A-kv650
Esc: Detrum pro 50A
Servo: 9g *4
battery: 14.8V 2200mAh 25C
prop: 13*6.5

They don't say anything about the weight, but it's going to have pretty good power at 49" and a 4 cell battery.

Bob

1250mm? What the heck is that? Can we have some American specs please?

kthxbye!!!

Originally Posted by rmgmag

Specs:

wingspan:1250mm
length:1235mm
motor: BM3720A-kv650
Esc: Detrum pro 50A
Servo: 9g *4
battery: 14.8V 2200mAh 25C
prop: 13*6.5

They don't say anything about the weight, but it's going to have pretty good power at 49" and a 4 cell battery.

Bob

Mucho interesting if they have stiffened the foam wings...is she 3D, pattern, what? Wouldn't you want a 13x4 on the nose for 3D?

Coolest thing would be if I could pull the power system outta my carbon z yak & stuff it in there...the cz motor pulls like a locomotive but its 1000kv (I run 13x4)

Originally Posted by MaddSkillz

1250mm? What the heck is that? Can we have some American specs please?

kthxbye!!!

Roughly 49"

Originally Posted by poiyt

Mucho interesting if they have stiffened the foam wings...is she 3D, pattern, what? Wouldn't you want a 13x4 on the nose for 3D?

Coolest thing would be if I could pull the power system outta my carbon z yak & stuff it in there...the cz motor pulls like a locomotive but its 1000kv (I run 13x4)

judging by the rudder and elevator surface area this very much looks like a 3d plane though i think the weight may effect how good of a 3d plane this will be.

Originally Posted by shadow102

judging by the rudder and elevator surface area this very much looks like a 3d plane though i think the weight may effect how good of a 3d plane this will be.

Looks like wings have carbon & also come off

As to auw vs 3D capability, if she has enough power, wouldn't that get the job done??

Can you buy these as a plug n play where you can just add a reciever?

Originally Posted by shadow102

judging by the rudder and elevator surface area this very much looks like a 3d plane though i think the weight may effect how good of a 3d plane this will be.

Well, as I said in our Atlanta thread on this I'm guessing it will hit the 48 ounces or so that the Dynam T-28 of this size does. If so, then it will likely be a decent performer (given the right motor) since the 3DHS and EXF planes of this same size hit that same AUW.