Originally Posted by Eagle202

Looks like a lot of it is milled out aluminum. Really nice clean lines.

Do you have a video of it in use?

CMS Catapult V2.avi (0 min 13 sec)

Originally Posted by deTonaTor_NZ

http://youtu.be/YLMcy42Bx1o

That is so smooth even launching that big X8. Really nice job. Thanks for the video.

Hi, Quick Question.. how the ZII handles high winds?
I live in the coast and almost all the year around is windy..
Thanks!!

Pablo.

Originally Posted by pablojaime

Hi, Quick Question.. how the ZII handles high winds?
I live in the coast and almost all the year around is windy..
Thanks!!

Pablo.

Beautifully! Very stable.

Could someone tell me where I can get replacement laminate Chris sells with his Z2 kit? I am looking for a roll of 100 to 200 feet in length but I am unsure what thickness or type. I have found this website in the states but could someone recommend which one is best:

http://www.laminatorwarehouse.com/

Thanks for any help

Originally Posted by SPG

Beautifully! Very stable.

Thanks!!

Pablo.

Originally Posted by seibernator

Could someone tell me where I can get replacement laminate Chris sells with his Z2 kit? I am looking for a roll of 100 to 200 feet in length but I am unsure what thickness or type. I have found this website in the states but could someone recommend which one is best:

http://www.laminatorwarehouse.com/

Thanks for any help

Hello,

You can go with:
http://www.modellbau-joost.de/magent...te-1000mm.html
It's the same 3 mil that Ritewing provides, but if you want something more durable:
5mil - http://www.modellbau-joost.de/magent...te-1000mm.html
and even more:
10mil - http://www.modellbau-joost.de/magent...1000mm-36.html

All the best,

Geotete

Originally Posted by seibernator

Could someone tell me where I can get replacement laminate Chris sells with his Z2 kit? I am looking for a roll of 100 to 200 feet in length but I am unsure what thickness or type. I have found this website in the states but could someone recommend which one is best:

http://www.laminatorwarehouse.com/

Thanks for any help

Not sure about that website yo listed but this is where i get mine from very cheap and just like the one you get in the kit. I used 3mil x18
http://www.canuckengineering.com/new.../film-covering ]

Thanks guys, much appreciated!!

Originally Posted by whosthebaddest

Awesome video one of the best I've ever seen!!! If you don't mind me asking what was your battery/lipo configuration and how much does your zephyr weigh to get up that high? Thanks!!

I don't know how much it weighs, I dont have scales to weigh :-/ I use 2x3300mAh 11.1V Turnigy lipo for engine and servos, 1x 1300mAh 3S for FPV. Here you can find my model: http://rc-fpv.pl/viewtopic.php?t=8885





Another video with clouds

Zephyr i chmury / RiteWing Zephyr ZII and clouds FPV (2 min 41 sec)

The checker finish is cool, where did u track that stuff down at

Just to let ya'll know. I've made more clearance at the prop tips, scalloped out the back of the wing to more of a TE to decrease prop noise and increase efficiency. It's considerably quieter!

Originally Posted by pablojaime

Hi, Quick Question.. how the ZII handles high winds?
I live in the coast and almost all the year around is windy..
Thanks!!

Pablo.

yeah it goes well in wind. heavier builds go the best ie:more than 2.5kg

Edit

Nice, very cool!