what is a really fast miniZ setup motor/esc/prop? what servos are a bang for the buck special?

How fast do ou want to go?
HS 65 MG are awesome!
But if your not going try to go slow!
I got a couple setups you can try!

real fast like a hundred....... for a while would even better than short bursts. Don't mind spending some money, my first thought is an inrunner of some type but i still want to get some range out of it. It'll stricly be an fpv rig with all the recordings done at the ground station so it doesn't get too loaded down. Love those servos....

ideas?

good micro setup= http://www.gobrushless.com/shop/inde...ef=MD2505-4800

APC 4.1 x 4.1E prop

http://www.gobrushless.com/shop/inde...f=DUALSKY3040A

add a strong 3s 1600 (maybe a little bigger im not sure what these take) and it should see 100mph no problem

nice..... all the ratings on that motor are 2s,,,,, 3s is cool?

if theres a 4s-6s solution, i'd love to hear about it

Thought I'd share some pics of my zeph II

http://www.gobrushless.com/shop/inde...ef=MD2510-2700

(4s) MAS 5.5 x 4.5, 12.4V, 53A, 650W

that would be completely nuts

you may find you only have room in the micro for 2s or 3s anyways mate

Do you mean as far as motors go?

Originally Posted by Kloner

nice..... all the ratings on that motor are 2s,,,,, 3s is cool?

if theres a 4s-6s solution, i'd love to hear about it

yea, what do ya got in mind?

Originally Posted by deTonaTor_NZ

Thought I'd share some pics of my zeph II

Are you sure that you can use RVOSD so turned ? You can use it only turned in the direction of the two arrows.

For the ZXL or the mini Z?

Originally Posted by Kloner

yea, what do ya got in mind?

he is talking mini

Here is a few motors that I just got, 3542 1200 is what I stock regularly. I just got a new batch of 1200 and 1400 kV 3542. I got a few of the 3542 900 and 800 kV to test. The 3 larger motors I am testing is a larger planes

Originally Posted by klique

For the ZXL or the mini Z?

Klique.. when will you open a new thread for the ZXL ?