I completely forgot about the 52. I had that one too. That was my first CP heli. I can remember buildem336 used to fly one too.

I guess you guys know that Wow is selling the C05 with 9t & ESC as a BL kit.

Where did you guys get the KDBB tail blade for genius?

Originally Posted by OnceAFly

Where did you guys get the KDBB tail blade for genius?

OnceAFly who in this thread said they had the kdbb blade on their genius? lol

I want one, but think they are talking about kdbb main blades.

I dont think its out on the market yet. but I could be wrong

dave

this is the servo I use on both my genius cp's now, slop is next to none, plus they have replacement gears, but I have yet to strip one.

the blue bird servos wouldnt work, I like the hk 2g servos better anyway.

http://www.hobbyking.com/hobbyking/s...g_0_08sec.html

feels more connected to inputs.

but you have to swap the + and - on the plug and they will only work with 1s applications

Nobody tried the 8000kv HP03T as a main? I guessing it has more torque than the 11,000kv "S" and we may be able to use the stock pinion. I'm thinking the difference is a delta winding on the "S", and wye on the "T". Opinion, conjecture???

regards,
Bill

Originally Posted by Air Vaca

Nobody tried the 8000kv HP03T as a main? I guessing it has more torque than the 11,000kv "S" and we may be able to use the stock pinion. I'm thinking the difference is a delta winding on the "S", and wye on the "T". Opinion, conjecture???

regards,
Bill

I have one sitting here so I just grabbed it and took a look. Not sure I could figure out how to mount it in the frame? I guess it could be done with some serious modification but seems to me it would be more trouble than it is worth.

No serious mods required. I think...reverse the shaft and the mount can be as simple as a piece of plastic with a hole to set the motor in and two screw holes to mount that to the frame or am I oversimplifying it?

regards,
Bill

Yea I guess that may work but I don't have confidence that I would be able to reverse the shaft and get it back together in one piece.

Still sounds difficult to me lol.

The shaft should loosen its grip from the bell with application of a little heat, knock on wood.
I have lots of time and very few $s. When I get to trying it, I will post my results.

Yes please do I would be interested to see. Maybe if I saw you pull it off succesfully I would possibly give it a try.

Originally Posted by f.a.r.m.e.r

this is the servo I use on both my genius cp's now, slop is next to none, plus they have replacement gears, but I have yet to strip one.

the blue bird servos wouldnt work, I like the hk 2g servos better anyway.

http://www.hobbyking.com/hobbyking/s...g_0_08sec.html

feels more connected to inputs.

but you have to swap the + and - on the plug and they will only work with 1s applications

Wow they are a good price 4 fot the price of a single walkera servo - and just a couple of wires to switch how do they fit Dave - any special modification needed or do they just drop in

Regards David

Originally Posted by Hellraser

Wow they are a good price 4 fot the price of a single walkera servo - and just a couple of wires to switch how do they fit Dave - any special modification needed or do they just drop in

Regards David

Yea, could you please post a pic of your heli with the new servos in it.

Originally Posted by buster7467

Yea, could you please post a pic of your heli with the new servos in it.

yes, i'd like to know what mods are necessary as well. it would be well worth it for paying only 3.99/servo.

yea for that price i would like to order 12 of them. That is a cheap price.