Originally Posted by f.a.r.m.e.r

I just got between 5400-5450 0 pitch 100% tc with hyp 240 8t pin on my warner tach.

Right so that is higher than the calculator predicts but sounds ok to me

Regards David

I just did a flight and ran the lipo until cutoff and i hit 6 minutes with the 240mah hyperions. When you guys are flying in idle up do you usually keep your flights at 3 minutes?

Sorry that was 6 minutes of flying in normal mode with a TC of 0 50 70 84.5 100. When i fly in idle up the TC is set to a flat 100.

Originally Posted by buster7467

Are you trying to tame it down some for indoor flying? I really love how it handles when i fly it outside. I can usually keep it within a 20-25ft circle while doing my style of 3d. I can't do anything special but i have fun at it. I wish i would have tried the stock brushed motor with the hyperions. That may be all i need for an indoor heli.

I fly my stock motor with hyperion battery in the house flippin. never again with my hp03s I turned my girlfriends plants into a chef salad lol

havnt tried C05 indoor yet buy I will tonight, if im not back in a few days it will mean that it didnt go so well and my girlfriend kicked me out the house

Originally Posted by f.a.r.m.e.r

I fly my stock motor with hyperion battery in the house flippin. never again with my hp03s I turned my girlfriends plants into a chef salad lol

havnt tried C05 indoor yet buy I will tonight, if im not back in a few days it will mean that it didnt go so well and my girlfriend kicked me out the house

Bonsai LOL a bit of vigorous pruning helps new growth

Regards David

Originally Posted by Hellraser

Right so that is higher than the calculator predicts but sounds ok to me

Regards David

yeah It does sound about right I guess my ears were wrong lol. its higher then I thought it would be. lol

Originally Posted by buster7467

I just did a flight and ran the lipo until cutoff and i hit 6 minutes with the 240mah hyperions. When you guys are flying in idle up do you usually keep your flights at 3 minutes?

I set my timer at 3:00 and 3:30

Originally Posted by f.a.r.m.e.r

I set my timer at 3:00 and 3:30

So are you giving up on the HP03S now & just use C05.

Well mine is down for repair. I was flipping it indoor and lost it and stripped the front servo. Got to put in an order for some spare parts. I already know i am getting a couple frames and a couple servos. Other than that, i don't really break anything.

Originally Posted by vronny

So are you giving up on the HP03S now & just use C05.

yeah for now im happy with the C05 unless some one finds a good combo that works with the hp03s. if I had better collective.management it probably work just fine.

at 1:41 in this video my genius cp bounced off a car driving by and kept on flying lol

Walkera Genius Cp Stock (2 min 37 sec)

hello farmer,
good flight! and good heli!
I have a genius Cp, and I'm transforming to brushless with hp8 of 7000KV,
but problems in the tail, it moving same a flag.
Can you tell me if you're using the original double side for receptor ? my genius has a more vibration,

and where I can buy the carbon tube tail more long?

and the tail blade?


sorry about so many questions, but your heli is extraordinary!
a greeting

Originally Posted by f.a.r.m.e.r

iv never ordered from them im going to give them a try

@livonia bob what you running on your heli?

Originally Posted by jaimerioco

hello farmer,
good flight! and good heli!
I have a genius Cp, and I'm transforming to brushless with hp8 of 7000KV,
but problems in the tail, it moving same a flag.
Can you tell me if you're using the original double side for receptor ? my genius has a more vibration,

and where I can buy the carbon tube tail more long?

and the tail blade?


sorry about so many questions, but your heli is extraordinary!
a greeting

You can make your own by buying the CF square tube or buy from Wow. 2mm by 2mm by 1mm hole

I just took apart my stripped servo and was able to turn the gear that had a couple stripped teeth and was able to get it to work again. I wish walkera would sale the servo gears separate so we could repair the bad servos instead of throwing them in the trash.

Originally Posted by buster7467

I just took apart my stripped servo and was able to turn the gear that had a couple stripped teeth and was able to get it to work again. I wish walkera would sale the servo gears separate so we could repair the bad servos instead of throwing them in the trash.

I saw it posted somewhere that the gears out of the old 4#3 servos are the same as the gears in the Genius servos, haven't tried one to see yet...I just repaired the ELEV servo on one of my Genius's by turning the gear as you did.

Regards,
John