Originally Posted by ApexAero

http://www.hobbypartz.com/alaleldufan6.html

Thanks....looks like you get the rotor, spinner and shroud for that. Weight is 74g, which I am assuming is for the whole shooting match...

Originally Posted by alexandermh

Those RC Lander shrouds are real heavy.

I also found aluminium shrouds at Extreme_RC. Bit more expensive but the weight is 40g (shroud only). http://www.extremerc.com.au/estore/i...oducts_id=1059

Originally Posted by Burdo

Does anybody know what's happened to this shroud. When I first went on the site it was there, went back and now the Product is not found?

I went to order a pr also and found the same, I contacted them (Philip) and he gave me a link page to order them, a couple of days later they were posted, shipping charge to Aus was good :-) I weighed a plastic counter part it went in at 40g, but if you add a decent alloy heat sink I would think the all up weight would be about the same as the Lander unit

Mike

Originally Posted by Burdo

Thanks....looks like you get the rotor, spinner and shroud for that. Weight is 76g, which I am assuming is for the whole shooting match...



I also found aluminium shrouds at Extreme_RC. Bit more expensive but the weight is 40g (shroud only). http://www.extremerc.com.au/estore/i...oducts_id=1059

The Extreme_RC housings looks to be made of better material. Does anyone know how much the CS70 rotor weigh?

has anyone ran this fan over 40k yet, this fans wall seems to be 40k

Originally Posted by limodune

I went to order a pr also and found the same, I contacted them (Philip) and he gave me a link page to order them, a couple of days later they were posted, shipping charge to Aus was good :-) I weighed a plastic counter part it went in at 40g, but if you add a decent alloy heat sink I would think the all up weight would be about the same as the Lander unit

Mike

I'm also liking the look of the aluminium spinner. I wonder if that would fit the CS rotor, or at least be able to be modified to suit....

Originally Posted by Burdo

I also found aluminium shrouds at Extreme_RC. Bit more expensive but the weight is 40g (shroud only). http://www.extremerc.com.au/estore/i...oducts_id=1059

Quite a difference between my housings and the chinese factory doing the lander etc, the finishing is much finer on mine, better stators, higher tolerances.

Originally Posted by Extreme_RC

Quite a difference between my housings and the chinese factory doing the lander etc, the finishing is much finer on mine, better stators, higher tolerances.

What is the total weight for this unit?

I would weigh one for you but am completely out of them, waiting on new housing order to come in, slight changes too so might be even lighter than current model.

Here is new vid with 10 blade rotor, Cyclone 3300kv Outrunner on 4cells.

SapacF16 Speed Runs.MOV (2 min 25 sec)

Originally Posted by beachflyer

Here is new vid with 10 blade rotor, Cyclone 3300kv Outrunner on 4cells.
http://www.youtube.com/watch?v=p35yqY7o-b4

Whoa!!!! Very nice!!!

That flies extremely well. What is the total weight of your F16?

beachflyer, killer video wow!

more please?

what was your speed?

fred

Originally Posted by beachflyer

Here is new vid with 10 blade rotor, Cyclone 3300kv Outrunner on 4cells.
http://www.youtube.com/watch?v=p35yqY7o-b4

Flies fantastic beachflyer! Btw is there a difference between the SAPAC F-16 and the Phase 3 F-16?

Originally Posted by flazo

beachflyer, killer video wow!

more please?

what was your speed?

fred

I just did an rcspeedo check on my phone with 21degree C (probably a lot cooler at the beach). Fastest pass it could recognize was at 186.4 km/h or 115mp/h. The last pass was probably a lot more faster, but since he was talking the app couldn't recognize/analyze it. Maybe someone with a PC doppler app would yield more accurate results?

I think that would fall under the phrase "Crunching numbers"!

Originally Posted by munce31

I just did an rcspeedo check on my phone with 21degree C (probably a lot cooler at the beach). Fastest pass it could recognize was at 186.4 km/h or 115mp/h. The last pass was probably a lot more faster, but since he was talking the app couldn't recognize/analyze it. Maybe someone with a PC doppler app would yield more accurate results?

Lol but besides the 'crunching number', it flies really good. I'm just waiting on extremerc to get the fan combo back in stock so i can put one into my P3 F-16