Originally Posted by Tamjets

I had told my machinist to cut me a break for these spinners to honor all my customers had purchase my washer and shaft adaptor.
I sold $10 each to the customers that already got the washer.
For new complete washer, shaft and spinner are $35 a set.

Sounds good, I have your aluminum washers, just need the new Aluminum Spinners.
When are these going to be ready, I didn't see them on your site?

Originally Posted by RugFlyer

Sounds good, I have your aluminum washers, just need the new Aluminum Spinners.
When are these going to be ready, I didn't see them on your site?

Mid week I can start shipping only for customers had order the washer and shaft.
Tomorrow come in turn on the machine and start productions run.

Originally Posted by Tamjets

Yesterday got the spinner sample for testing.
Three out of three run true. No need to find the smooth spots. It smooth as long the rotor are smooth.
The machinist play with the program few hours to fine tune in the spinner to get true. He is good...he able to save little time because it not need to polish looking like the spinner we made for TJ rotor.

Wow looks awesome! Glad to see you did it.

Very Nice looking fans Tam.

Cheers,
Eric B.

Originally Posted by Tamjets

Mid week I can start shipping only for customers had order the washer and shaft.
Tomorrow come in turn on the machine and start productions run.

Figures as I just got the shaft and washer for 2...

Originally Posted by Goody63

About 60mm.

Cheers

Roger that, thanks.

Tam, does the spinner fit your existing washer and adapter shaft kit? Will you offer the spinner as an addition to previous order customers?
Tom

Originally Posted by ApexAero

Tam, does the spinner fit your existing washer and adapter shaft kit? Will you offer the spinner as an addition to previous order customers?
Tom

Yes it make only to fit my washer.
So for those already got the washer. You only need the spinner.
The spinner wouldn't work without the washer.

Well cool then. I'll be ordering some when there done as well. Actually just got the adapter and washers it today so thanks!

This morning got the machining running.
I just finish doing quality control each spinner from this morning run.
Got 100% pass QC.
Tonight the parts be up online for tomorrow shipping.

Hi Tam,

I just ran up my TJ70 w/ CS rotor plug n play. It was delivered today.

It sounds really good and is pretty smooth.

But my spinner is plastic .

I also previously bought three washers.

Hopefully your team can do me right on the spinner situation.

-DG

Lookin' for that Stumax tailcone/esc mod/kit this week !!!!!

You have some of the best toys out there !!!!!!!!!!!!

Originally Posted by Flip Flop

Hey Rick, I'm using the stock housing. The SU will go up tomorrow with the Tacon 2550kv motors on 5s, got the idea from SKYRYDER1000.
They do pull around 75 amps and 1500 watts at WOT per side. Originally I started with the CP 3300's on 4s and the amps were to high so then I went with the CP 2800's on 4s but did not have enough power and on 5s the amps
were crazy. With these Tacon motors I think they are the happy medium.
Should have video tomorrow.

Thanks for the recognition Flip Flop.. The Tacon 2550 kv motor is a real winner on 5s. I plan to test it on 6s next. After a very hard run on 5s the shaft temp on my motor only gets to about 102 F on a hot day, so it's a good posibility it can handle 6s.

Looking forward to your next video..

Do you have any motor recomendation that will work well on 4s with this fan?

Originally Posted by Dave Grife

Hi Tam,

I just ran up my TJ70 w/ CS rotor plug n play. It was delivered today.

It sounds really good and is pretty smooth.

But my spinner is plastic .

I also previously bought three washers.

Hopefully your team can do me right on the spinner situation.

-DG

Lookin' for that Stumax tailcone/esc mod/kit this week !!!!!

You have some of the best toys out there !!!!!!!!!!!!

Dave,
I just put up the spinner online.
This item just added to our inventories. So any previous washer order or TJ70 CS rotor will get $5 off on each spinner order.

http://www.tamjets.com/original/prod...roducts_id=707

This week we had special for customers already had our washer. When you place the order. Remember to tell me your invoice number or mention you had order our washer. I'll give $5 off when process the order.

Originally Posted by SKYRYDER1000

Thanks for the recognition Flip Flop.. The Tacon 2550 kv motor is a real winner on 5s. I plan to test it on 6s next. After a very hard run on 5s the shaft temp on my motor only gets to about 102 F on a hot day, so it's a good posibility it can handle 6s.

Looking forward to your next video..

Do you have any motor recomendation that will work well on 4s with this fan?

No problem, I'm glad you brought that motor to our attention it works awesome, I like the CP outrunners but I'm kinda partial to inrunners.

The CP 2800 kv and the 3300 are decent 4s motors, plus I know alot of guys are using HET motors on 4s.

Thanks for the suggestions. Any idea what the amp draw is on the CP 2800 kv?