Originally Posted by Ascended

Same situation being your transmitters voltage is still rapidly dropping?

Or same situation that the TX isnt talking to the rx properly?

Or both?


If the first... try the TX with just the cable plugged in, no dragonlink.

Second.. Rebind. If you calibrated before, calibrate again for just 30-60seconds before binding. Running the TX at low voltage may have screwed up the calibration.

If you've done all this, can you create a quick video with the TX and RX in view, showing the LEDs of the TX, and the LEDs of the RX?

Im recharging the batteries before I begin again.
As far as the dropping battery that has gone away with the bigger battery.
I did rebind and nothing, then re calibrated...still nothing.
Once the batts are back up (flew my multi around a while) I will get back at it and do the whole processes with video.

Originally Posted by JettPilot

Working in RC is good, and its bad. I fly FPV much less than I used to since getting into this business It is real work !!! The good part is that most people here are really nice and just great to deal with.

Mike

I have been brought up to believe that as long as you love what job/profession you are doing nothing else quit matters....

Originally Posted by JettPilot

Working in RC is good, and its bad. I fly FPV much less than I used to since getting into this business It is real work !!! The good part is that most people here are really nice and just great to deal with.

Mike

You messed up by being the owner of the business.

You should hire him and force him to work long hours while you go enjoy fpv.

Mike if you weren't as far from civilization as possible, you could have part-time or even volunteer (paid in DL RX!) works help you with the repetitive stuff.

Ok still just have a power on light on the Rx. Have gone through it all again... bind, calibrate. The whole works.

Still just a power on light. No servo activity except when the power first comes on and thats it.

The green and blue lights flicker on for a second right at power up and then go away. No servo control. Nothing.

wits end here...

I tried to order a DL OSD today and they seem to be out of stock. Is there any word on when they might be back in stock?

Still looking for a DL Rx fully wired up and ready to fly. Call me a noob but I just want to see how the wires are set in. I have been looking for any photos of this and the most I see are one servo wire but I am looking for a full set up.

I just want to be sure I have everything in and ready.

Originally Posted by AbsAltitudes

I tried to order a DL OSD today and they seem to be out of stock. Is there any word on when they might be back in stock?

From other threads and posts I think RMRC just got some in yesterday or the day before. You might check with them.

Yabba

Originally Posted by Yabba

From other threads and posts I think RMRC just got some in yesterday or the day before. You might check with them.

Yabba

Thanks but I already checked readymade and they seem to be out of stock too...

I was also looking to get the whole package(OSD, GPS, current sensor) Its about $30 cheaper to order direct. I guess in the end $30 extra isn't that much when it comes to this hobby. It is just a matter of how bad and quickly I want to get it

Originally Posted by AbsAltitudes

Thanks but I already checked readymade and they seem to be out of stock too...

I was also looking to get the whole package(OSD, GPS, current sensor) Its about $30 cheaper to order direct. I guess in the end $30 extra isn't that much when it comes to this hobby. It is just a matter of how bad and quickly I want to get it

Sorry, my reading didn't connect to my brain.

I thought you wanted a DL. He got those in stock but you wanted the D-OSD.

My bad, just trying to be helpful when I should have just kept quite.

Yabba

are there any DL experienced people that live in florida?

Originally Posted by Yabba

Sorry, my reading didn't connect to my brain.

I thought you wanted a DL. He got those in stock but you wanted the D-OSD.

My bad, just trying to be helpful when I should have just kept quite.

Yabba

No worries, it was a good idea to check other places to see if anyone had something in stock. After checking RMRC I went to hobbywireless, and they have it in stock, just in the debate over paying an extra $30...lol

Originally Posted by AbsAltitudes

No worries, it was a good idea to check other places to see if anyone had something in stock. After checking RMRC I went to hobbywireless, and they have it in stock, just in the debate over paying an extra $30...lol

Be sure you are buying the newest version. I find it hard to believe there is a $30 price difference, unless you have expensive shipping from one place over the other.....

Originally Posted by alwaysconfused

are there any DL experienced people that live in florida?

haha i heard some guy named Mike/jet pilot lives there somewhere...

Originally Posted by Eastcoast78

haha i heard some guy named Mike/jet pilot lives there somewhere...

Beat me to it