Order 2 from Schweighofer austria, i'll try to do one edf and the other with pusher motor........

http://www.hacker-motor-shop.com/e-v...&c=4965&p=4965

how cool is that!!!
i've got an hyperion y12 5800kv motor and 2 dymond d47 servo's from an 30mm micro f86 saber 1/20 experiment the only problem is that my smallest battery is 450mah from hyperion

did anyone got experience with high wing loading at small planes?
iv'e got an sebart angel s30 to but i didn't have experience with high wing loading

That combo looks fun

Glad to see that some are taking the hint. This is much more suited as a pusher. the right combo and this is going to be fast with relatively light wing loading. I gotta get one of these airframes.

Originally Posted by bobby67

Order 2 from Schweighofer austria, i'll try to do one edf and the other with pusher motor........

i'm realy interested!

the back of the jet is 20mm as you can see here:

http://www.hacker-motor.com/daten/an...niViper_RC.pdf

Originally Posted by invertmast

So you can order them direct from Tomahawk in Germany. they run about $18/ea since we dont have VAT. Shipping for 1 up to 25 is another 29euro.

I'm planning to order 2 of them, is anyone else interested in putting in an order for a few and splitting on the shipping cost over here? I've got no problems having them all come to me and dispatch them off to everyone else.

Thomas

hmm holland 7 euro shipping cost

Originally Posted by robertboxhoorn

hmm holland 7 euro shipping cost

Lucky! Even just one is 29 eurp tp ship to the us. Im half tempted to just oorder the 70mmedf and the mini at the same time.

Originally Posted by robertboxhoorn

i'm realy interested!

the back of the jet is 20mm as you can see here:

http://www.hacker-motor.com/daten/an...niViper_RC.pdf

I Have a similar motor but AXI...my old Multiplex Fox is very nice with this motor, i think Viper will be ballistic.......the two models are on the way.....

witch axi motor? the smallest axi motor is 28mm and the hacker is 20mm ;-)

Originally Posted by robertboxhoorn

witch axi motor? the smallest axi motor is 28mm and the hacker is 20mm ;-)

you're right! It's the 2203/52, 27.70 mm in diameter .... maybe too big for the Viper ........ I guess I will take this Hacker.....

Can this kit be bought elsewhere?

jup maybe an e10 that is faster than an a10 ;-)

Today is here! done very well, weighs 44 grams. without the balance weight of 10 grams. under the canopy (a screw). I think it 's impossible to convert in EDF, the cone has a diameter of 21 mm and the air intake are microscopic ........

Originally Posted by MegaTesla

Hollowing out the fuse and trying to put a fan in there will be a pain!

Originally Posted by bobby67

...I think it 's impossible to convert in EDF, the cone has a diameter of 21 mm and the air intake are microscopic ........

Put a prop on it and have some fun

I'd like to know how fast this baby would go!