|Oct 06, 2011, 03:40 PM|
Raleigh NC Area - E-Flite Mini Edge 540, Grasshopper L4, Ultimate FX 3D, Hyperion
I have too many planes that I don't / won't fly anymore. Details below:
I'm in Holly Springs, NC just Southwest of Raleigh.
E-Flite L4 Grasshopper: http://www.e-fliterc.com/Products/De...ProdID=EFL5025
+Built with Park 250, prop saver, eflite 10a esc, eflite servos. Includes e-flite 2s 800mah lipo. Small rash on left wing top and left gear was bent a little on landing - otherwise looks new. 2 new spare props. Prop saver o-ring broke due to age the other day so will need one of those for 2mm prop - park 250. $175. I now have a box and will mail it on your dime if you want it. Will include Spektrum AR6000 RX for another $30.
E-Flite Mini Edge 540 http://www.e-fliterc.com/Products/De...ProdID=EFL2225
+Built with Frio 10 - 1050KV motor, 18A ESC with switch, HS55 servos. two in wing are not installed, it had cheapos in it and last time I flew it I put two HS55 in but never bolted them in. Looks new, gear, etc are perfect. $100.
*** SOLD **** E-flite Ultimate FX 3D http://www.e-fliterc.com/Products/De...ProdID=EFL2175
+Built with ??? no name motor and ESC, Dynam servos, 12x6 prop, only repair is left aileron was glued long ago. It's fraigle foam so amazed it's still in one piece . $50
*** SOLD ***** 3DHS SHP = The blue/white near the top: 3DHS 47" SHP Mint Condition.
+Built with Turnigy 3530-100 motor, not sure of the ESC can't read it well, HS55 servos. I flew it casually, never 3d so very low rates and it pulls good but no idea if it will hang. Looks new, classy plane! $125.
|Oct 06, 2011, 03:51 PM|
The grasshopper has the e-flite / Park 250 motor, e-flite ESC and servos as recommended by e-flite. Propsaver and 3 props (2 new spares). Never crashed but the landing gear is fragile and is bent on the left side thus the covering isn't tight. The left wing has a small bare spot in the covering due to hanger rash. Flies great. Perfect otherwise.
I cost this one a while back and if I recall correctly, new cost would be in the $225-250 range plus 3-5 hours of assembly. $175 would work.
|Oct 06, 2011, 04:14 PM|
It's a SlowBipe. Buy one you'll love it! www.slowbipe.com and search here on RCG for other info he has. Creeps along at a walk pace or will move out! I'm about to order a 2nd one.
|Oct 06, 2011, 04:53 PM|
Guys: LPU only for now.
Please only PM me if you can pick up near Raleigh (I'm in Apex just southwest of Raleigh but can drive to meet within reason).
*** NO RX for these. May have a battery but not guaranteed.
|Oct 06, 2011, 06:03 PM|
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||E Flite Ultimate FX 3D ARF NIB LOWER PRICE||shovelheadfreak||Aircraft - Electric - Airplanes (FS/W)||4||Aug 17, 2011 03:07 PM|
|Sold||E-Flite Mini Edge 540||Kevlar||Aircraft - Electric - Airplanes (FS/W)||4||Mar 15, 2011 12:45 PM|
|Discussion||Fliton Mini Edge 540 or E-flite Mini Edge 540? That is the question.||CGReload||3D Flying||4||Feb 13, 2008 03:17 PM|
|Help!||Katana Mini?, E-flite Edge 540?, Fliton Edge?, Hyperion Yak 55SP?.......||Cudaboy||3D Flying||23||Jan 25, 2006 01:10 PM|
|E-Flite Yak 54f. Mini Edge. Ultimate Fx 3D||tf2psycho||3D Flying||5||Aug 13, 2005 04:13 AM|