HobbyKing.com New Products Flash Sale
Reply
Thread Tools
Old Oct 01, 2011, 07:44 AM
Registered User
Joined Sep 2011
188 Posts
Discussion
Arducopter 3dr new carbon frame build log

I crashed my ArducopterMega a on the second flight after spending a long time building it. It sat in the corner as a twisted hunk of plastic and metal for months while I built many other multi-rotors)the arducoptermega was my first). Now I finally started rebuilding it with the new 3dr frame and I must say it's a much nicer setup then the old clear plastic cheesy looking frame. Here are a few pics:

I will update this thread once I finish wiring it up tomorrow and get it flying. I have a full FPV setup for this one with Fatshark 580Mghz(?) FPV goggles with the head track gyro and a nice little camera mounted under the copter with a custom pan/tilt mount I made that tracks with my head movement. Looking forward to trying full FPV experience. This arducopter has every option as far as electronics goes, GPS, magnetometer, xbee telemetry, spectrum telemetry, LED lights attached to the relay so they can be turned on and off via my transmitter as well as an atmega3238p chip on a custom PCB that controls a bunch of RGB LED strips to make a sweet light show at dark
ezmobius is offline Find More Posts by ezmobius
Reply With Quote
Sign up now
to remove ads between posts
Reply


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log New Y6 frame build!!! tc3wins Multirotor Talk 28 Sep 21, 2011 12:26 AM
Build Log "MK" V 1.35 on a 575mm Homemade frame Build Log RChelisrule Multirotor Talk 4 May 30, 2011 09:57 PM