|Sep 30, 2011, 08:53 PM|
Paris 3.0 AP board, Arduino Pro Mini, WM+ clone board, Nunchuk clone board
Here's the story: I bought this with the intent of building a MultiWiiCopter, and was able to successfully upload the MultiWii firmware to the board, but could never get the board to talk to the MultiWii configuration program. Maybe it's just me, but I've moved on with a different controller, so I'm hoping someone else can use this hardware instead of it sitting in my parts bin.
$25 shipped CONUS for everything you see in the photo. Will also consider trades for brushless motors and ESCs.
|Sep 30, 2011, 09:27 PM|
Clearwater, FLorida !
Joined Sep 2009
Trader Rating: 41
IF you want to keep this controller and give it one more go.
if you send this to me, I will connect everything for you, and load up the sketch for you, I will get it working for you depending on the all the hardware is working order.
looks like you have cloned hardware. The real nintendo stuff is a little easier to connect. but it should be able to be done.
If you ask around. You will see that I am qualified.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Sold||Paris 3.0 baords, BMP180, BMA085, WM+, etc.||cferrell||Aircraft - Electric - Multirotor (FS/W)||1||Aug 30, 2011 08:57 PM|
|Sold||Paris 3.0 Board Assembled w/ USB Programmer||Biznatch||Aircraft - Electric - Multirotor (FS/W)||3||Jun 01, 2011 06:02 PM|
|Sold||Paris MWC board Ready for flight w/Arduino Pro Mini 5/16mhz,Wii Motion+,Bosch BMA02||Z06 Tony||Aircraft - Electric - Multirotor (FS/W)||16||May 27, 2011 08:56 AM|
|Sold||Paris MWC board Ready for flight w/Arduino Pro Mini 5/16mhz,Wii Motion+,Bosch BMA02||Z06 Tony||Aircraft - Electric - Helis (FS/W)||1||May 26, 2011 03:31 PM|
|Sold||FF IMU w/Paris AP 3.0 shield & Arduino Pro Mini 5V||fpv_copter||Aircraft - Electric - Multirotor (FS/W)||7||May 19, 2011 04:23 PM|