test of the gps and altitude lock

dji wkm.MTS (3 min 15 sec)

Nice setup of the quad looks very stable great job a little time and patients pays off well. It would be nice if you had gear and payload to see how that changes things or not.

Michael64

Nicely done.. it's like when you touch it is says: "get off me!" :-)

I do like the look of that frame.

Originally Posted by killy

test of the gps and altitude lock

http://www.youtube.com/watch?v=VTX7i8XYS8A

Killy,

Looking good !!!

I have two of the Quads left in stock. Will have them on the website tonight.

Hexa's are coming very soon also.

Keep up!!!

Originally Posted by killy

test of the gps and altitude lock

Very nice altitude hold! I can see by trees in background there is considerable breeze. I'd say by the looks of that video the alt hold is every bit as good or better than the MK alt hold.

I'll have our big Octo XL flying with the WK-M as soon as we get our power module.

heres my rig. Initial test flight is good at stock settings. Awaiting my power module and its test-n-tune time.
Ordered the Wookong from DJIUSA, as I do all my DJI goods, and couldn't be happier. Thanks Robert.
This AD-6 originally flew for about a year with MK electronics.
Matt

Nice ship Matt! Clean install!

Originally Posted by killy

test of the gps and altitude lock

very nice...what kind of motors/esc do you use ?

Originally Posted by Photoship One

Nice ship Matt! Clean install!

thanks bo...

Originally Posted by webdr

heres my rig. Initial test flight is good at stock settings. Awaiting my power module and its test-n-tune time.
Ordered the Wookong from DJIUSA, as I do all my DJI goods, and couldn't be happier. Thanks Robert.
This AD-6 originally flew for about a year with MK electronics.
Matt

Exactly what I'm dreaming of... very nice !

Originally Posted by webdr

heres my rig. Initial test flight is good at stock settings. Awaiting my power module and its test-n-tune time.
Ordered the Wookong from DJIUSA, as I do all my DJI goods, and couldn't be happier. Thanks Robert.
This AD-6 originally flew for about a year with MK electronics.
Matt

Very nice!!!

Thanks for the kind words even thou the a$$ kissing gets old on this thread. LOL!!

What are you using for a power Dist. board or are you not?

DJ at PS1 has a real nice one. We will be carrying them any day. I'll send ya one.

@robert check the videos of the hexa 85E it is strong and nice.

@ photoship one, i tested today the quad 50E with dji wkm and i maidened the hexa 85E with Mk and i can tell you the mk is not a litlle as good as the dji wkm on gps and alti hold, unbelievable. but when flying around the mk is better, i hope dji can make it possible that i can switch in 2 modes (that i can assign a channel so i can switch between optimal gains for hold position and optimal flying gains).

@ protowax

the props are 10 x 4,5 from Hobbyking
esc plush 25A
and 10 $ motors from ebay A2212

Originally Posted by killy

@robert check the videos of the hexa 85E it is strong and nice.

@ photoship one, i tested today the quad 50E with dji wkm and i maidened the hexa 85E with Mk and i can tell you the mk is not a litlle as good as the dji wkm on gps and alti hold, unbelievable. but when flying around the mk is better, i hope dji can make it possible that i can switch in 2 modes (that i can assign a channel so i can switch between optimal gains for hold position and optimal flying gains).

@ protowax

the props are 10 x 4,5 from Hobbyking
esc plush 25A
and 10 $ motors from ebay A2212

Oh we have the videos running at the shop as we speak.

haha i thought i will make looping video at the end, because i thought it was to big to get it done, but no problem. lol

Originally Posted by rerazor

Very nice!!!

Thanks for the kind words even thou the a$$ kissing gets old on this thread. LOL!!

What are you using for a power Dist. board or are you not?

DJ at PS1 has a real nice one. We will be carrying them any day. I'll send ya one.

No PDB, but I made a nice harness. Send it, I could use it on my next rig.
matt