|Jul 05, 2011, 05:23 PM|
This is a completely different avenue for me to take.......
a small 10" motor to motor quadcopter!
I am making the frame myself, out of alloy 15mm square tube, and sheet carbon for the center plates.
So far, so good, alloy cut and shaped, then drilled out to save weight, waiting on the carbon to arrive so i can cut it to size. The cardboard templates have been cut and the thing assembled to visualize what it will look like!
The lower plate has a 'nose' to it, as that is where i would like to place a keychain cam at some stage. The bolts i have used so far are button head m2.5x20 with nuts, in stainless.
I have the kk blackboard as the brain, gws 5030 props(2x counterclockwise, 2x clockwise),the other parts are yet to be figured out.
|Jul 06, 2011, 01:33 PM|
Ok, had a think about power and motor options. going to either be 6a esc's with 10g motors, or may go nuts and use 10a esc's with 20g motors!
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Alert||Axial Wraith Unboxing and Review Video||MEDiC2009||Rock Crawlers||3||Jun 03, 2011 02:57 PM|
|Alert||RC Adventures - Unofficial Axial Wraith Running Video||MEDiC2009||Rock Crawlers||0||May 29, 2011 12:47 AM|
|Build Log||Wraith V2 - A nearly indestructible FPV park flyer||IBCrazy||FPV Talk||34||Dec 19, 2010 03:35 AM|
|Build Log||"Wraith" New EDF jet design!||X-Planes||Electric Ducted Fan Jet Talk||17||Apr 01, 2010 03:10 PM|
|Wraith F5D?||Shackas||High Performance||4||Oct 27, 2004 10:01 AM|