Here are some pictures of my A380 during construction. The only problem i experinced sofar was when i first drew the centre sheeting i did not think of the grain of depron, so when i tried to bend it around the fuselage formers is crinkeled a little i had to use my heat gun for it to bend round, it does not look to bad but iam not happy about it really, i already ajusted my autocad drawings to change the way the part is on the depron sheet. I will recut out the airframe on my cnc, and take photos for my instruction manual but also i will include the lighting system i brought for it from hobbyking.

Can't wait to get this one flying.

hi guys, just added pictures with nacelles added to the wing made from a healthy drink bottle. Actimel http://www.actimel.co.uk/Flavours/Default.aspx. The link is so you can see the shape of the bottle close up, by the way im not advertising

just added pics with the ailerons attached

Depron Airbus A380 (3 min 11 sec)

Pretty cool! What about using those AEO 8 blade small fans?

good stuff brett.

Originally Posted by SilentHunter

Pretty cool! What about using those AEO 8 blade small fans?

Hi silenthunter, id love to use edfs but trying to keep the costs down.

Originally Posted by Doushiyou12

good stuff brett.

doushiyou12 thanks. just redesigning the engine pod assembley, hope to have the completed wing done later, will post pictures

How in Jhon CLeeses name did I miss your stunning A380 Brett? God almighty when I buuild one of these I hope it looks as good as yours Sir!

Subscribed and proud of it!

nice work man! this would look great with 4 35mm edf fans

Originally Posted by ZEROSKIN76

nice work man! this would look great with 4 35mm edf fans

zeroskin76 ive tried design this for prop use as i wanted to design a plane that was cheap build and kit out, but when i get the kits ready anybody who buys one could convert it to edf, i would love to put edfs but the cost does not do it for me im using an under £5 brushless motor and cheap 9g servos.

Originally Posted by demondriver

Subscribed and proud of it!

thanks demondriver

i like your thinking about kitting these out cheap

but lets say one was to want to convert it what in the size of pod

Originally Posted by ZEROSKIN76

i like your thinking about kitting these out cheap

but lets say one was to want to convert it what in the size of pod

the size of the pod is 42mm diameter, length 82mm, ive attached a pic

thats perfect, where you releasing kits in us from?

Originally Posted by ZEROSKIN76

thats perfect, where you releasing kits in us from?

erm, it would have to be from me in the uk, if kits get realesed as i do not have any links to anybody in the us, im looking into haveing a website or just may sell them through ebay

hello brett how much would it cost for you to laser cut me a q-100 i may also have to travel down to where you fly PM me your address