Joined Jul 2009
Red Wing Rc 30cc Mx2 best 30cc out there
Hello everyone. I am going to put a thread together on the Red Wing RC 30cc Mx2.
This plane is by far one of the best 3d 30cc planes out there.
Take a look at the spec that are awsome.
Wingarea 1025 sq in (66sq dm)
Flying weight 9.5 to 10lbs TRUE AUW!
(with gas set up ours came to 9.7lbs WITH spinner wheel pants EVERYTHING!)
Engine 26cc to 30cc gas
This plane is super light!! and IT EVEN COMES WITH A SPINNER!!!!
The 30cc Mx2 also has some very nice Features such as.
Strong and light construction
Carbon fiber wingtube
Foam turtle deck, for super smooth finish
Fiberglass double truss control horns
Ringed Cowl for no external screws
Aerfoiled tail wings - scale and better flight
Prehinged Wings, partially hinged tail
Beautiuful painted fiberglass cowl and wheel pants
High quality Ultra-Cote covering
Full bodied true to scale appearance
Finished cockpit area, requires no work by you
Pre plumbed tank, ready for gas.
You might not believe it but this plane is ready for a tuned pipe!!!!
Yeah thats right. It has a tuned pipe tunnel already running through the bottom of the airplane
Here is some build videos.
Plane overview http://www.youtube.com/user/RedwingR...28/mdnin-aKQb4
Part 1 http://www.youtube.com/user/RedwingR...27/lTuwVHMs2zM
Part 2 http://www.youtube.com/user/RedwingR...26/YZ7UN3Jfv4Q
Part 3 http://www.youtube.com/user/RedwingR...25/UPGdJymXktQ
Part 4 http://www.youtube.com/user/RedwingR...24/-E4fAHMtS34
Part 5 http://www.youtube.com/user/RedwingR...23/W0NWFTa1MF8
Part 6 http://www.youtube.com/user/RedwingR...22/d7f2y8hoWtE
Part 7 http://www.youtube.com/user/RedwingR...21/AgE2qau_9B8
If you have any questions please feel free to ask and I will be happy to answer them.
ImagesView all Images in thread
I have the green goldwing version with a DLE 30.
I beefed up the formers around the landing gear block with fiberglass an light ply.
With the CG in the middle of the wing tube it was hard for me to land the plane in a nose high condition. I went to the 4 7/8 CG for now.
It's a great plane to fly.
I did manage to put it in the top of a tree coming out of an outside snap she was in a deep stall. I should of went WOT and used thrust vectoring to pull out of it.
It's fine though I used a boom truck to get it out.
I'm having a buddy put the decals on it now.
I'm not really a 3D pilot but I do some 3D.
I recommend the carbon fiber landing gear from redwing for anyone flying with a more rearward cg.
I had mine at 5 1/4 and my poor landing gear really got abused. I have it at 4 7/8's now and she flys and lands like a trainer, well maybe alittle faster LOL
I had the opportunity to fly a buddies MX2 this past week. His is set up with the 28cc J?? gasser they sell. What a nice aircraft, flys like it's on rails, lands slow, the all up weight of 10.5# really makes for a 3D capable setup. I hovered a little, but that's about it for 3D moves (not my airplane). As long as you don't do a smack-down on good old mother earth, it's a winner!
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Gold Wing RC SBACH-342 V3 30CC / 73" / 26%||eJets||Giant Electric Planes||26||Nov 26, 2011 12:43 PM|
|Question||Best park jet out there?||slyfoxflyer66||Electric Plane Talk||6||Apr 28, 2011 05:31 PM|
|Discussion||What is the best Extra or Edge between 46"-59" out there?||KillerCut||3D Flying||39||Mar 18, 2011 07:56 PM|
|Discussion||best rc car out there..||1jet14||Electric Power Cars||8||Apr 02, 2009 03:07 PM|
|Upgrading from a Zagi 400X, whats the best wing out there (48")||RandyK1||Foamies (Kits)||9||Jul 22, 2003 08:23 PM|