|May 25, 2011, 10:20 AM|
Two T-REX 450SE V2 (CopterX) clones - Reciever Ready $225 or Trade
Up for sale is my 450 SE V2 helicopter collection. Both these helicopters are based on the copterx 450 helis and are exactly the same and 100% compatible with align 450 parts. They both have align belts and carbon fiber tail booms. They have alloy heads/tails and are made completely of carbon/alloy.
Heli #1 - Ready to fly - 15 flights - Excellent Condition
Drop in your receiver and it is ready to fly. This heli is dialed in perfectly and is very stable. It has about 15 flights on it and is in excellent condition. It has never crashed or even landed hard. The only imperfections are some small nicks on the tail blades.. which is common. This doesn't really matter though because this heli lot comes with extras
It contains; the Typhoon motor, which is widely known to be a one of the best 450 motors. The 40amp Mystery programmable ESC. The D922MG Tail servo which is rated at .07 seconds, combined with the HK401b gyro which holds the tail solid 100% of the time. I should also mention that I went overboard on securing the tail servo, I never did trust the stock brackets..
Heli #2 -Almost ready to fly - 10 flights -
This heli has about 10 flights on it and suffered a very slight blade strike to a sapling. The only damage that occurred was a chip in the blade(lot comes with extras) and a sheered screw on the head(lot comes with extras). I would rate this fix a 10.0 on the easy scale and will probably take about 5 minutes to fix.
Just like the heli number 1, this is all carbon and alloy. The tail actually has much fewer nicks because it has few flights on it. The hardware is all here to get this heli in the air, but you will have to provide electronics.
Recap, here is what is included:
2x 450 SE V2 helis (one is RTF, the other is ARF)
2x Extra carbon fiber blades
2x Extra plastic blades (white)
4x Extra plastic paddles
2x Extra carbon fiber paddles
1x Extra alloy tail boom
2X Extra main shafts
1X Extra screws
2X Extra landing skids
2X Extra tail rotor
+ more extras that I can dig up
I've got about $400 into this setup and I'm willing to let the entire lot go for $225 + shipping. If your looking to get into 450 helis, this package will get you up and flying in as long as it takes to drop in your receiver.
|May 25, 2011, 09:19 PM|
I found my rotor pitch gauge and I decided to throw a 2200mah 3S 25C FlightMax LiPo in just to sweeten the deal(pictures soon). If it doesn't sell soon I'm either going to change my mind and keep the helis or put them up on ebay
|May 26, 2011, 08:28 AM|
Hmm.. I hadn't planned on splitting them up, but I guess that's possible. I could then fix up the other heli and still have one on hand.
Ultimately, my better half wouldn't be pleased if I turned down an offer. She needs more closet space
I will PM my paypal info for you.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Sold Align T-Rex 450SE Airframe||daddyrabbit1954||Aircraft - Electric - Helis (FS/W)||0||May 22, 2011 09:20 PM|
|Help! Align T-rex 450 SE V2: Why won't you start?!||dylantorquerol||Mini Helis||2||Apr 20, 2011 12:24 AM|
|Discussion 2024 Aluminium +T6BA titnium Gears For T-REX 500 and CopterX Clones||lothar2048||Electric Heli Talk||5||Mar 08, 2011 11:59 PM|
|For Sale Two T-REX 250SE EXI clones - All carbon+alloy w/case - perfect setup for 250's||Sl0flyer||Aircraft - Electric - Helis (FS/W)||15||Jan 30, 2011 03:05 PM|
|Discussion Cheap T-rex or CopterX Clones or Scams?||Glider-man||Mini Helis||29||Sep 29, 2009 10:46 PM|