Dark Side Models X-3D depron jet
I have finally gotten around to doing the build on the X-3D jet, the X-3D is very maneuverable and a BLAST to fly! its very stable in harrier. I think a video or two says it all:
A quick look:
Wing Span: 24"
motor:2200kv 2 cell outrunner
Motor:Hyperion hp-z1705(about the same as a hacker a-10-13s)
battery:nanotech 350mah 2s
Full kits come with:
All foam parts
All carbon necessary
Music wire for Z bends
CNC cut control horns and motor mount
Short kits(all foam parts)$20
All kits come pre-beveled
I balance My model just behind the prop, But I recommend starting with it just in front of the prop until you get the feel for the model.
For throws I run aprox 45 degree's with 90% expo.
If you got a kit off of me in TX this year and have questions about the build please don't hesitate to ask!
Thanks for looking. more video&pic's coming soon!
ImagesView all Images in thread
thanks for the video's Gary! the model I built for the log is out of what appears to be Depron or at least a closer family member than the Gediplac your kit was cut out of...its a little heaver but significantly stiffer. I'll be bringing down kits out of this foam...as well as EPP
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Wanted||X-Bl-3D X-ufo Quadrocopter||skyhulk||Aircraft - Sailplanes (FS/W)||0||Mar 06, 2011 04:02 AM|
|Discussion||'Good' Jobs Report Has Dark Side||Arbo||Life, The Universe, and Politics||2||Mar 05, 2011 02:45 PM|
|Discussion||helifrek has crossed into the dark side, well mini side....||helifrek||Mini Helis||24||Apr 08, 2008 04:25 PM|
|This X-wing is a little on the "Dark Side"||RobinBennett||3D Flying||40||May 21, 2005 10:23 AM|