Originally Posted by SENTRY 62

^^ it's plug and play - uses the same harness. Contact Skylark to get one.

More Skylark Tiny OSD footage. I LOVE this OSD!! Get yours today!!! It's nice with the 4hz GPS - I will do more 10hz testing if I have good weather. I do have a new board so I want to make sure that the board was the issue before and not the 10hz GPS

Looks like the altitude reading issues have been cleared up.

Is there an option to show the lat and long on screen?

Originally Posted by Flying-Monkey

Looks like the altitude reading issues have been cleared up.

Is there an option to show the lat and long on screen?

Lat/Lon are only seen in the "F-16" display mode (the one with altitude and airspeed ladders on the sides) which is selectable with the software.

kendall

Originally Posted by skylarkfpv

The new Tiny OSD has been sent out via DHL, please check and reply after receive.

Best regards,
Skylark FPV Service Center
http://www.SkylarkFPV.com

I received DHL package today.

thanks.

Originally Posted by Flying-Monkey

Looks like the altitude reading issues have been cleared up.

Is there an option to show the lat and long on screen?

NOTE: this was on an old board and old firmware. This is just to show you what the output looks like. ** before the new firmware and the new 4hz GPS **

More DeeZee Testing (11 min 46 sec)

Hello Skylark,

Will you be providing proper update driver software for Vista and Windows 7? As you can see from some of the posts, your current software only seems to work with XP. This is keeping many of us from considering your product.

Kind regards,

cliff

I am planning on purchasing an OSD soon, and this seems to have just the features I need. The question: would these work at 320x240 resolution, or would the text be unreadable? Thanks!

I had the sk osd working good on my quadkopter. Today I decided to try a new transmitter & I forgot the tx puts out 12 volts. I powered the osd from the tx with 12v so now I think the osd is blown out. Is there anyway I can fix it? Or do I need new one?

Thanks.

Originally Posted by signflyer

I am planning on purchasing an OSD soon, and this seems to have just the features I need. The question: would these work at 320x240 resolution, or would the text be unreadable? Thanks!

The OSD works well at 320*240

Thank you!

skylarkfpv,
has been having for one month the skylark and continuous to have problems with the altimeter, it is almost always not reliable when it doesn't jam completely.
Have I adjourned with the last fw and the other data they are enough truthful but the altimeter is not an altimeter... as to do? Other question that you has been suspended, what the second button serves that sull is found' osd. you excuse for the bad inglese..

Al.

Originally Posted by teebok

I had the sk osd working good on my quadkopter. Today I decided to try a new transmitter & I forgot the tx puts out 12 volts. I powered the osd from the tx with 12v so now I think the osd is blown out. Is there anyway I can fix it? Or do I need new one?

Thanks.

We suggest that you purchase a new OSD board
http://www.skylarkfpv.com/store/inde...&product_id=78

Hey, they actually updated their Tiny OSD software to work with Win7 x64! I can confirm it works!

http://www.skylarkfpv.com/download/S...Setup_V3.0.zip

Originally Posted by teebok

I received DHL package today.

thanks.

skylark i just received the original order # 26 i placed on May, 14

what would you like me to do?

Originally Posted by teebok

skylark i just received the original order # 26 i placed on May, 14

what would you like me to do?

Please check your email.

hi skylark,
wanted to know if it were possible to effect an exchange of the old gps 10hz with the new one from 4hz, not wanting to spend further money.
Do I repeat the question it posts before, does it serve the second button that sull is found to what' osd? regards Al.